I thought it was the same as my old Disco 1. However, when searching, nothing came up suggesting this. Does the bulb fit into an aperture. I know I pushed something through and I believe it was the holder. Thanks

I have just taken the facia off and went to put the bulb in. However, the above part number is not for this heater. The base is circular. I have taken a picture (which I will try to upload) of the aperture - note it is rectangular. I have also taken a photo of the control itself. Can anyone...

That's great - I assume it is plug and play. Only concern I have is that I thought the bulb was clear. Is this possible? Colour of light is green and I guess it could be this. In terms of PITA this was easy - once I figured it out. I need to do it again in order to explain. Once I do it, I will...

I have the very basic heater control - non digital. The bulb blew a while back and I managed to find out how to access it. I couldn't pull the bulb out and ended up bu breaking it. It appeared to be housed in a small black plastic holder. I pushed this and it went back towards the bulkhead and...

Thats brilliant - thank you.

Hi. It has been quite a while since I have posted. Would really appreciate some more advice. When my fan heater is on, it blows out hot air. However, there is a high pitch whistle from what appears to be the motor. It sounds as though something is in it. Is it easy to access the fan? If so, how...

My son is due to start at Plymouth university and has decided to take his car (non Discovery). I do not know Plymouth and would welcome any recommendations for a decent mechanic/garage. When you don't know the area, it is so easy to get ripped off. I don't relish those calls that start with my...

Tyre pressures are fine and I recently had new bushes all round. Front calipers, discs and pads were replaced last year. I think the issue may well be with the back ones. Will check at the weekend.

Totally agree about light breaking. The high position allows for excellent vision and hence light braking. I've just taken it out for a test down a quiet road and applied the brake hard. The Disco is definitely pulling to the left.

Just got back from Plymouth, which was a 220 mile drive. Disco drove superbly. We were collecting my son and all of his clobber from University. All fitted in the back of the Disco, with 4 of us in the car. Due to late night, early morning I drove the first part, but, was too tired to carry on...

Update: Thanks, Meego. I phoned Island 4x4 up and they said it was on back order. The new hose arrived and I was going to drive the Disco to my local mechanic. However, could not engage gear. Tried bleeding the system - no luck. Called the RAC and they tried bleeding the system. Air was getting...

Success - Breakers have one - Not cheap, but at least it will keep me on the road. I am going to use the old one as a template and see if PIRTEC can make one up. As this is second hand, it may well go at some point. If not, I know there is a market out there and will sell it at some point.

Cheers Neilly. I am waiting for a call from a breaker as he may have one. It depends if they damage it when they remove it. If I have no luck with this, I will get a damaged one and take it to Steve.

This is getting absolutely ridiculous. I have worked through google and noone has the part in stock. All state it is on back-order. This has been the case for over 3 months. I have tried Hydraulic manufacturer and they have stated it cannot be done, due to the flexible pipe. Clutch fluid will...

That's a good point. I did contact him last time and he had just sold it to the company who looked at my Disco. He might have a damaged one, which wouldn't matter. Another call tomorrow!

That is very kind of you. If I can find a part tomorrow, I will take it to a mechanic. If I can't, I will have to see what I can do. I need to take it to Plymouth to pick my son up from Uni on the 10th. I go back to work on the 5th - bad timing!

Neilly - you are quite right, you did. Following the issue with it, I opted for a well known Landrover Specialist, who at the time had a salvage pipe in. They reported there was no issue with the pipe as it was perfectly dry. They did however point out about £2000 of work that would be needed...

I have someone who can fit it for me on Saturday. Issue I have with Hydraulic agent is that I will have to remove the pipe. Due to a recent shoulder operation, I am unable to do this. I will just keep phoning people tomorrow. I was hoping someone might know a place who had them in stock. If you...

Discool - I have been in touch with a supplier who advertises it and they do not have it in stock. Last time I looked, this was the case with all suppliers. Hopefully, someone will have one in stock.

MF Hydraulics is not far from me and I will phone them tomorrow. My only concern is that I need it by Saturday. I don't know if they will be able to do it by then. I looked on John Craddock website and they imply it maybe in stock. Again, I will phone tomorrow. I am trying to cover all bases...