OH dear just found this on the net (is for my model) not good Code Entry instructions for?Clarion PU 9836A Switch the radio on? display shows CODE IN Enter the code using the preset buttons I.e if the code is : 5412 Press preset "?5 " Press preset "?4 " Press preset "?1 " Press preset "?2 "...

SOme good news but not a final answer im afraid Nipped out at lunchtime & popped to a new range rover authorised dealer near me thats just taken over from a vw garage (without the rangie) Found a freindly chap from the service department He checked the code via using my chasis as reference -...

Glad to hear im not the only one suffering this problem (apologies for the long winded entry but the sound of silence is driving me crazy!) I have a P38 too, following a battery problem my radio needed a code as did my immobiliser. Eventually i obtained the two codes from a main dealer...

Have recently suffered a flat battery (on a '97 P38 4.6 Auto HSE) & as well as the stereo requiring an unknown code, the battery didnt seem to hold charge. During this time i've been getting gear box fault coming up on the display but no other symptons. New battery this morning & on parking up...

rewmwer - thanks for your entry, looks like you were right thanks again

You guys would appear to have it down to a "T" I did a quick search on blend motors & these symptons definetly point to failed blend motor this site http://www.rangerovers.net/repairdetails/blendmotor.html has instructions on fitting new ones & a quick fault finding test - cant vouch for...

Hi to sound really naive & to ask a stupid question, would a blend motor fault create the problem that i have - passenger(L/H) side vents blow hot air no matter what the setting is on the control? thanks

Ok having got back from holiday i'm now still without music I decided that my code is wrong & have now got code software - any one who needs a code contact me- but im still stuck with the 4 dashes, band n man being pushed makes no difference, even tried pulling the f1 fuse any one any new...

Any ideas people? Air con was working fine, then sometimes it thinks the outside temperature is 0 degrees, meaning it blows warmish air, but after 10 mins the outside temperature reading slowly counts up to actual outdoor temp. However recently been getting the book & "!" symbol displayed at...

thanks, much appreciated wantaquad, found the nipples & yes the passenger one was blocked. Found the tube too (bit fiddly but what isn't) great advice thanks again, pockers Now to try to solve the problem of constant hot ait blowing from passenger side - time to start a new thread on...

Good luck explaining that one to her I also have been stricken with the same problem Puddle in foot well & i cant find those nipples either - bell housing ? no idea! Also my passenger side air venys blow hot air no matter what & the fault symbol is displayed - could this all be linked...

HI thanks but Itried that one, the radio still powered up with the fuse out, but tried it, got the horizontal lines "----", pressed band & man but to no avail- let me know if you get it to work & ill try it again. HAd to leave ignition on for an hour just to get the radio back to "code in"...

Thanks clutch dust however, i can get the code to come up on the display just dont know what to do from there. On powering the radio back up it displayed "code in". I put the code in using the 1-6 buttons & the code now just sits on the display. I've tried pressing the band button, tried...

HI Glad to hear its not just me! i'm suffering the same problem, had a power failure, obtainedthe code from Landrover themselves. On powering the radio back up it displayed "code in". I put the code in using the 1-6 buttons & the code now just sits on the display. I've tried pressing the band...

HI ive got a 1997 P38 Range rover, due to a power failure the radio has reset & requires a code. I got the radio code (and the engine code) from a main dealer but i dont know how to enter the code on the radio. Its a tape head unit with a cd changer. On the first try it said "code" & i put...