1. S

    icarsoft i930

    has your lights stayed off after turning them off thanks
  2. S

    3 amigos

    no the front two as they are what the hawkeye was saying were faulty it looks like ill have to get another two as they are playing funny ie hill decent switch on with sensor connected but not plugged into the wheel light flashes when plugged into the wheel abs pump stirs then hdc light stops...
  3. S

    3 amigos

    Hi Jedi the sensors read ok all the time even when the lights are on but ill check them again the ones I got off ebay were 19.99 each from the same place you got yours
  4. S

    3 amigos

    :doh::mad2: well they are back on so I removed the battery leads to reset but still the same I cant find anything else that would cause them to so bludy intermittent when they work all works as it should its doing my head in
  5. S

    3 amigos

    Hi I just went and took the brake light switch off and cleaned it and stretched the spring before putting it back on I drove it and the tc light and amber hdc light came on after putting the switch back on the lights are off ill try it tomorrow and see if they stay off if they do ill get a new...
  6. S

    3 amigos

    Hi thanks for the replies why should land rover sort them because its there fault the system is crap all the codes were read by the garage and cleared 3 times I have been back
  7. S

    3 amigos

    Hi Jedi I have replaced them when they were said to be faulty with the hawkeye ist the nearside then the offside all within a few days the still did not work right they were working yesterday when I arrived home today I switched on the ignition and the bludy lights were back on this cant be...
  8. S

    3 amigos

    well drove for first time today and the nightmare lights are back on again and they did not go out with the run too the shop and back land rover uk needs to sort all these cars for free
  9. S

    3 amigos

    Hi Jedi that's the ones I used on the front the rear ones were on it when I got it one of the front ones nearside was faulty when I got the motor but the ones I have put in are working I just hope it keeps working after pumping the brakes
  10. S

    3 amigos

    ebay sensors they are working so far just gave it a run to local shops and back about 6 to 8 mile round trip the only thing I done yesterday was to pump the brake pedal to get the shoe adjusters to move they seem to be working since doing that hears hoping
  11. S

    3 amigos

    Hi thanks for the information I just drove it 12 miles lights came on around 10m parked for half hour then drove to garage 9 miles lights off got fuel drove 8m lights off parked at shop switched off again as in the garage then started drove 7 m home lights still off so only came on once I...
  12. S

    3 amigos

    padded cell oh I think they would put the hippo in with me to keep me nuts
  13. S

    3 amigos

    Hi yes the ohms test on sensors are ok but that dose not mean they will send the right voltage I haven't changed the brake light switch as it works and I have cleaned it with switch cleaner I use on ham radio equipment etc
  14. S

    3 amigos

    Hi wiring seems all ok I thought the ignition was the cause but cleaned the contacts and still the same the puzzle is why should it work then not work I have thought I have cured it many times as all the lights go out and the hdc works etc then they come back on when I go back and drive it...
  15. S

    3 amigos

    Hi yes checked the rings even cleaned all the groves out also wheel bearings are fine even put brand new front discs and pads only thing is I noticed a squeal this may be the cause
  16. S

    3 amigos

    Hi as I said I have had it checked on hawk eye each time it says sensors on the front offside then nearside changed them but still the same changed again but still the same its driving me nuts
  17. S

    3 amigos

    but I did say I have tried everything in my first post and was looking for some one who had the same fault and cured it some how thanks
  18. S

    3 amigos

    Hi thanks that's been tried as well also all connections check ok with multi meter
  19. S

    3 amigos

    thanks tried that a few times and it kept saying sensors for the ads even after being changed for new ones
  20. S

    3 amigos

    Hi guys I have had the three amigos for a while I have tried every thing I can think of ie sensors brake switch relays earth connections etc but they still keep mucking about one minute they work the next they go faulty again I drove more than 8 miles with the lights on went into a friends...