cheers guys yes i still thought about doing the moduale conversion with the 2 wires. will also check play in the bearings.

hi guys i got the abs light on and the hd light on and the tc light on and the hand brake light wont go off. so i got it code read and it brought up front right abs sensor output to low. shuttle valve electrical failure. now just to put you in the picture it had the front driverside ripped...

hi guys i have just done the svs test on my abs modulator. i put 1 prong on my tester on pin 9 and the other on pin 6 brings up 3.0 then when i press both switches down i get reading 101 and then press indivigually i get 201 has this passed as the illustration im not to sure about. thanx

hi mike thanks for that i will take a look at to see if connection is ok. also do you know were i would find the engine knock sensor. hows things anyway.

hi because i borrowed a snap on off my m8 and decided to go through the lot so i just wrote down what was on the display.

hi guys had a diagnoses on my td5 03 plate. as i had the 3 amiego lights on. come up with shuttle valve electrical fault. i have the link on this site how to fix that. now i had engine managment read. this is the faults it came up with. high speed crank synchronization lost (fault)...

hi i borrowed my mates snap on diagnostic. abs faults brought up shuttle valve electrical fault. front abs sensor low out put. then i did engine managment. brought up the following. high speed crank synchronization lost fault noisy crank signal detected. road speed missing fault do you...

hi thanks for that link.

hi i need some one who has a code reader as mine wont connect is there anyone in the westmidlands or close to wolverhampton who could read and clear some codes for me plz. td5 03 plate

thanks.

also are thease engines chains or cambelts

hi i got a memoscan reader and when i plug it in it says connection error. and to be honest its very rare it fails to connect.

hi guys i have a td5 03 plate . had a small acident in it were the front wheel and hub detached from the vehicle. well all renewed and new abs sensor fitted and new brake flexiy. just bled the system brakes now spot on but i have drove the car only about 20 meters. and the abs light is still on...

hi guys finally did it i used heat and a large socket and hammered it out and then i used along piece of 8" inch tube slided it over ball joint and jacked it up so the weight of the vehicle was pushing up on the tube then lamped the top of casting it soon popped in. all i had to do after was...

hi every one i got a td5 03 plate. has any one ever removed the bottom ball joint on one. as its pressed in and if i was to have it pressed out i got to take the blummin axle off as the casting its pressed into is part of the axle casting. so for ive heated it and lamped it and still dont want...

thats great thankyou for your info

hi will the front wings fit off a 1999 td5 with normal headlights onto a 03 td5 with the face lift lights on so basically are the wings the same although the headlights are diffrent. regards paul

hi kev that exhaust is all off and i have the washer bottle let me know when you want to collect or i can post

Hi i break rangerover classics .competitive prices ebay link 220927262000 type this into ebay. We are based in wolverhampton. Any enquiries either through here or ebay,

hi i have done many of thease prone for p[ourus blocks crack in cylinderheads and head gaskets yours sounds like combustion is getting in to the water system which will cause pressurizing the system and hot and cold syptoms defently. one cure you can try and it works i fixed qite a few and they...