bobtail rangy
New Member
hi guys i got the abs light on and the hd light on and the tc light on and the hand brake light wont go off. so i got it code read and it brought up front right abs sensor output to low. shuttle valve electrical failure. now just to put you in the picture it had the front driverside ripped off which is all repaired now. abs sensor fitted. and i have done the shuttle valve electrical fault test which passed. cleared codes and lights went off untill i pressed the brakes all back on again with same faults. but when i switch ignition on they go out but then come straight back on. what else could it be any ideas would be good.