hi all i have a 200tdi engine in my rangie bobtail. i am have the turbo up rated to stage2. now i know i need a dump valve to get rid off excess build up of pressure. but do i need a certain 1 or can i just make fit agood blitz one from a car.

hi all i have a 200 tdi engine and box in my bobtail. im not sure which clutch kit is the better one to buy. here are a list of ones ive come across. valeo. ap. borg and beck . taking into account i do off road once a month .i do use this every day as my commutor vehicle. plus some green...

most people dont have a good understanding of cat-d motors .this motor had a wing replaced .front drivers hub and head light and corner bumper. thats it. no structual damage .so drives like any other motor if not better. had lots of new parts. full service guy salmon history and no previous...

this vehicle was a very light cat-d but has been fully repaired to a excellent standard. we have all photos we have taken b4 repair and after.your welcome to view them on viewing this vehicle . now please dont be put off as this has had no expense spared. this vehicle has guy salmon service...

james thanks for that info

hi every one will a 99 td5 transferbox fit on to a lt77 gearbox.

thats the one lay shaft bearing cheers

hi i think its call the lathe shaft bearing its making a noise wen clutch pressed in i changed the thrust bearing and it did not cure it so box off again. so im changeing complete clutch and that spiggott bearing and that other bearing what prevents the play in that shaft i need the name of it...

hi no the name of the bearing what fits in the centre of the bell houseing that shaft comes out the centre.

hi guys whats the name for the bearing that fits in the centre of the gearbox were the centre shaft comes out that fits in the centre of the clutch. as that shaft has up and down play in it.

never thought of that. also do you think it could be the lathe shaft bearing. only makes the noise when you start to release the clutch pedal up to were about the clutch bites b4 that point and after this point no noise but i can feel it under the pedal. if you hold it in the place were it makes...

hi guys last week put a message on here about a noise i got when pushing the clutch down and up sounds like a whirring noise. so i thought thrust bearing and so did ur selves think the same. any way box off today and release bearing changed. went for the final test and when i release the clutch...

yes i thought so was just hoping might of been something easier.

hi guys got a 2003 td5. now when i start to push the clutch down when it gets half way and i hold it i get this noise like a dry noise best described as if the alternater bearing was going. it goes away if i hold the clutch half way and put some revs on. then it will go completely after i...

hi can some one tell me if a rangerover classic window screen will fit a td5 03 plate. just that ive got one if it will.

hi guys i have taken the abs unit off and have now repaired it.i have fitted it back on but did i bleed the system right as the brakes dont seem very sharpe. i started at n/s rear then o/s rear then n/s front then o/s front . went round twice untill all surplus bubbles were out. but stll feel a...

yes the conversion was a defo cause b4 i did the conversion the 3 amigo lights would not go out at all. but when i fitted the abs pump bk yesterday after doing the wire conversion when i switched ignition on all lights on then when i started it they all went out and stayed out untill i went to...

hi just let everyone now know i have now fixed it i changed the front sensor and bingo all lights now off

hi again. right today i have gone ahead and carried out the wire conversion on the shuttle unit. after fitting the abs unit back in place i now went for the test. turned ignition on and all lights come on then start engine and bingo all lights go out except for the abs light. so i now put foot...

hi again. right today i have gone ahead and carried out the wire conversion on the shuttle unit. after fitting the abs unit back in place i now went for the test. turned ignition on and all lights come on then start engine and bingo all lights go out except for the abs light. so i now put foot...