1. D

    Truck cab and tailgate

    have a roof and a back for sale white roof blue back off a 300tdi
  2. D

    Defender 90 truck cab

    Best offer then ?!
  3. D

    Defender 90 truck cab

    yes sorry rear pannel with windows all in good condo
  4. D

    Defender 90 truck cab

    off a 300tdi 1994 defender so 18 yo and looking looking around the 200 mark
  5. D

    Defender 90 truck cab

    good condition comes with head lining usual small dents in roof,Blue back and White roof can send pic just pm me ! located in (high wycombe) Buckinghamshire or can be in wiltshire (chippenham) delivery can be arranged
  6. D

    Range Rover Classic lt77 V8 gear box

    Range Rover Classic lt77 V8 gear box with a 28D (1.222 ratio) transfer case good condition 33k on the clock believed to be genuine cant guarantee no oil leaks open to offers $$$ or landy parts located in Wiltshire (chippenham) or buckinghamshire (high wycombe) delivery can be arranged Best...
  7. D

    iforwilliams canopy

    I for williams canopy fitted to a series 3 88 have been told will fit 90's to good condition with cab seals does not have the gas strut to hold the gate up but has the metal rod open to offers $$$ or landy parts can be located between Wilstshire (chippeham area) or in buckinghamshire (high...
  8. D

    cock and blast ! lever slipping out of high ratio

    if its got the standard s3 box check they way the leaver is mounted on the gear box as if its fitted backwards it will jump out so swap it round and see if that helps ! i speak from experience of fitting it backwards ...
  9. D

    screamin its nuts off ..... heeelllpp ???

    its sat on the engine all pipes fitted but has been out side and your best offer plus postage unless you fancy a trip to wiltshire?
  10. D

    screamin its nuts off ..... heeelllpp ???

    where are you located near as i have a spare that should be fine for you to use !
  11. D

    series 3 or defender lower dash

    have got a s3 lower dash sat here resonable condition 10er plus postage ? can pm photos if needed
  12. D

    Breaking 1990 defender 90

    hi do you have the throttle assembly such as the pedal and the cable if so how much with postage ? in the chippenham area ?
  13. D

    Yet another restoration

    and some more
  14. D

    Yet another restoration

    Evening all i though i would share what has been my night mare for just over a year now i started this project when i was 17 (last feb) its still going on however i have found sometime spare and thought i would share , this is my 1974 s3 that i dragged out of a hedge she had been there for...
  15. D

    1997 defender wont start

    if your battery is all good and the connections are , try whipping the starter motor off and seeing if it spins freely when you turn it manually , ive had this before on my 200tdi , if its ceased spray it with freeing fluid and use a screw driver to spin it over !
  16. D

    wheels !

    afternoon , been doing lots of research as to what size tyres/rims can be fitted to a series 3 , and basically i cant make sense from the j8/j7 off set , however i was at a landy sort out the other day and went a bit mad on buying and got me some special tracks on modulars (235/85) and i have...
  17. D

    19J engine

    Hi have you still got the inlet manifold for the 19j engine? if so how much do you want for it? thanks
  18. D

    200Tdi injector specs

    has anyone got an outcome on this im seriously considering this mod due to a dead 200tdi pump and a cheap 300 pump and injectors ? please let me know the out come !
  19. D

    Bulkhead Gromits

    just about to get my bulkhead for my series 3 back from ashtree landrover and i was wondering where you go to get new gromits that seal the wiring loom and heater vents? ,as mine were fit for nothing but the bin i need new ones have searched on here for them already any help/ advice would be...
  20. D

    200tdi into series question

    evening all just got my new series 3 chassis from richards and am now deciding to fit a 200tdi with turbo and i was just wondering if its possible to fit with out cutting the battery tray and its galvanised and im rather reluctant to ! i have tried to find the answer else where but i wondered if...