Anyone got any idea's what the ratio's are in the disco axles?

Well done!

....A whole lot of hassle and time, mines owes me about £fuc4kn0sshowmanythousands so far..... in 3 years of ownership. ....If you really really want a series, buget about £1K with zero experiance over first year paying someone.... Or £300 quid and LOTS of time. Other option is to get a...

Right, 4.3 is up and running taken it for a few gentle runs not exceeded 2500RPM, ok a couple of times at full throttle, and I reckon its about 8MPG!!!!!!!!!!!!!!!!!!!! Enigne is running a little rich granted, and tuned (stage 3 heads, stealth cam, weber 500 - roller rockers etc...) Is...

Well it was bubbling a little.....

Great - 30 miles old, and battery probably toast - still could be worse... Thanks for advice....!

Mine was the same, but to compound the problem - I fitted a Sailbury rear diff which is about 1.5" longer!!! I when with GB springs and extended shackles - total lift is about 3" Only way to fix is throw monay at it I'm affraid! To sort prop angle out I cut off sring mounts remounted...

First few drives done! However last one was about 15mins, and got back home lifted bonnet to see Battery acid EVERYWHERE - battery does not seem to have a crack in it, but deffo battery acid - tested battery terminals with engine running and altenator was making 16.8 volts accross terminals...

Mine has a bad rattle - it is the bolt holding the levar to the box - the stick rattles on the bolt...

Been away for a few days recently and Finally drove my (nearly) finished S3 for the first time.... Thread was a quick thanks to all those who have helped, encouraged me over last few months!!!!!!!!!!!! Well as a experiance to drive - it was really scary - as every thing apart from the...

For the sake of a couple of quid just cut them off! I was in B & Q a few months or so ago and picked up some cutting dics that where 3mm thick! best bit they where £4 for a pack of 15!!!!! It took about 30 seconds per bolt, and now I have piece of mine that they are new! Just before...

I have a stealth cam variant from V8 Developments - which is just awesome ...Give ray or shaun a call really helpful nice guys...... V8Developments Ltd. More Balance = good! If your doing your fly wheel, don't forget clutch and mass damper..... ..I did everything on mine crank...

When changing from third to second push in clutch, move shifter to neutral pull out the clutch, give it a blip of the throttle, push in clutch, and then as revs are dropping apply pressure to second - takes a bit of practice but is good fun! Adds to the experiance. watch this guy on his down...

Be carefull on the earthing for bulbs - make sure the wires are not damaged under wings and do a continuity test on earths!

Did have some on mine - difference is noticible, especially as the petrol engine isnt the strongest. I changed engine and will probably refit at some point, as any benefit is worth it..... ...Like someone else already said avoid automatics - the bang on transmission is horrendous, and...

Put up some photos!!!!!!!!!!!!!!!!!!!!!!

YouTube - ‪4.3 TVR Lump in a 1973 series Landrover‬‏

Alright Cock! How you going? Just wondering how engine is going? Did you get a couple of pictures?

Dog, custard and a set of curtains included?

Got the fecker!!!! Left it over night in a bag FULL of plus Gas. Then hammered in a wedge, then heated it, then got a jack on the ball joint splitter!!!!!!!! Unbelievible...............