Can some one tell me where the cables from the steering wheel controls are found( at the back of the radio) before I pull out the radio again to complete the last few wires. Hippo - Looking good.....! Also found an annoying feature of the Xtrons unit . When you switch to GPS from the musci...

The unit came with an ISO connector which worked fine for the standard connections. Steering controls, illumination and unit extras require manual wiring or standard phono plugs. :cool:

It does sound a little basey at times but with some fine tuning it sounds good. Compared to my previous Freebie ('S' reg my current one sounds a lot better) :)

Know how you feel ;) Just to confirm the HK system works spot on with my unit. You just need to configure the sound in the music playback menu.

Sweet looking DVD units. Where did you get them from? Taz

2.0 Hippo - Sorry to hear you have problems with your unit..:frusty: Taz

Not tried out the phone / bluetooth yet. Will try it out later this week. Don' fancy hacking the unit up but will see how it goes.

Finally got piccies. Freddo's ALL MINE!!!!

I can almost taste the Freddo :p:p:p Thanks for the info on the steering wheel controls. Are the cables in radio snap connector C ? If not where can I find them? Just to confirm that the DVD Handbrake wire should be connected to earth to allow it to work without hand brake...

Damn! Thought I have won the Freddo Frog :doh: My unit is the 2011 Xtrons HD unit with IGO8 Sat Nav software. Link to Same unit: 7" LCD 2 DIN CAR DVD GPS High Definition Digital TD714G on eBay (end time 29-Mar-11 02:11:10 BST) It supports steering wheel controls and is fully...

Cheers Angus....:cool: I fitted the unit quite easily and it appears to work fine. Not connected the handbrake cable yet (Like the idea if a switch to ground). Where can you pick up the steering wheel control cables from? :confused: Tel

I have just bought a double din unit and am in the process of fitting it. The wiring loom fits fine but does anyone know what the wires are in socket C? I also need to find a signal wire for the hand break (which I assume is easy enough) and also a feed for the accelerator. Will add photos of...

I've looked in manual but couldn't find anything. I would have thought that if you could switch the creen off it wouldn't light up green, which it does. Taz :)

My radio / sat nav unit screen has stopped working. :mad: The radio appears to work and all the buttons, just can't see what I'm doin!!:doh: Is it possible to reset the unit or is it most likely to be dead? Also, can you fit a double Din unit in its place with removing the box under it...

Cheers Guys, will have a look this weekend. Taz :cool: :cool:

Anyone know the best way to fit the air intake pipes to a Twin Webber Carb. I currently have a IVG Filter on it. :confused: Can you get an air filter box to fit these carbs or will I have to cobble something together. :rolleyes: Also apart from the axle breathers what other breathers do...

Hi, If you look at the relay it should have a diagram with numbers on it. If you connect the feed from your staulk (Original feed to horn) to the relay switch side and the other side to earth and then use the other side of the relay for switching you live feed to your air horns When you...

I have a 1984 Defender 90. My fan speed selecter appears to be busted :( and I was thinking of putting a seperate switch in its place. Is it possible to hot wire the fan directly to test it, and if so what wire is what. I have looked at the fan and there appears to be 3 wires coming from it...

Hi, Welcome to the world of HI Maintenance Give us a clue :confused: Which of the fine Landy models do you have and which engine are you running? :confused:

I am looking at spending my hard borrowed cash on a shiny new winch and bumper for my 1984 Defender 90. Which type of winch is better :confused: HYDRAULIC / ELECTRICAL