Sorry it's on my l322 4.4 m62 engine

We've hit a brick wall It's a plug and drive ecu sf fly I have wired the petrol injectors to the brc ecu but no signal is coming out the ecu for the petrol injectors to work. He connected the power to the ecu but again no signal coming out the ecu injectors for it to fire up on petrol The ecu...

The body parts and cogs Item number 161939252000 Base item 112321246699

I have found the following unit on ebay. Its a telephone coms unit...

Ive received all the bits from the bay of flees and going to take it off to do the job. If anyone has the same problem then there is a few good vids on youtube on the BMW x5 mirror which is the same for the early models

ive come to the conclusion the cogs have stripped in mine. Can this motor be stripped whilst on the car as the motor is outside or does it have to be done off the car Looked high and low but found new parts totalling £30 to replace all cogs and housings to make it work again. Better than the...

When the installer pulls it apart I will have the inlet off and change quickly

just replacing a few items before the lpg gets installed That pcv valve is a barstool and the cyclonic oil thing is nearly impossible. Has anyone changed the pipe from this to the oil tube on the drivers side as it's a tip of the fingers job Anyway. Mine does not have the electric blanket...

Knock to cassette holding the cds whilst pressing the eject button works There's a YouTube clip on it if you search

You need to download the codes to get a good clue Is your oil level normal ?

For those that may come across it this is the exact noise and video of it. Look like pulling the blend motor and seeing whats not moving and grease the little b up

No again paints in Bedford are the mutts. Will stock everything you need and even mix a spray can up for you in your shade They have a eBay shop but your close enough for a visit

Thats Valeo dam auto correct

Just found info from another forum Looks like a valet blend motor on the drivers side http://www.rangerovers.net/forum/6-range-rover-mark-iii-l322/28668-found-cause-ratcheting-clicking-noise.html

Are you talking about the fan or the clicking The clicking noise is bugging me as the fan isn't noisy There is a YouTube clip that is the exact noise of clicking but didn't bother to post Solving it

When i open the door first thing there is a clicking like a motor with worn cogs coming from the centre console inside the car. i can also hear the fan slightly . It clicks about 4 tims then stops, Car heater is fine. Its already had the fan resistor changed (back in 2007 at the...

4.0 and 4.6 have different cams. You will need a cam with a tooth drive on it for a distributor You might as well lift the engine out as you have to strip that much off to get a new camshaft in. Take it to pieces and check it all over. Remember you are the master and the engine is the...

if it caught fire why didnt you claim on your insurance ? Electrical fires are a car killer and you could be chasing your tale and forking out shed loads to get it back to normal running if there is normal running on a p38. I wish you all the luck in getting it back to normal. P38s dont...

If your happy replacing the cam shaft you will see if any valves are bent through the intake All the Rads will have to come off the front to replace camshaft and drop the sump to collect all the bits that dropped in. Not much more work in dropping in a good block

ive just re read your post and you may be lucky where it broke the least would be a new cam bearings to make sure all is true.