Thanks, injectors fitted and l did use a dollop of grease.

Just an update, I removed the injectors with two Allen keys. I started with a 4mm and worked it loose with a 6mm. I’m really pleased l did it this way as you get a feel of the injector and it’s not as violent as using a slide hammer or an adapted pipe wrench and hammer.

Hi, does anyone have a Td5 injector slide hammer that l can borrow or hire in the North East. I need to change my injector seals and l cannot justify spending a fortune on a tool that l will hopefully only use once? Alternatively does anyone have one that they will sell me at an reasonable price?

Just an update, managed to get the fuel pump out, it was completely silted up and the pump is seized. I did try to clean it up but cannot get the pump to turn, so it’s a new pump. Now looking on eBay the price varies from £80 to several hundreds. Can anyone recommend a decent pump that’s not too...

Thanks, rather than cut an access hole is it possible to remove the tub floor?

l think l may have a problem with my fuel pump and hope someone can advise. My Defender Td5 is my toy of which l only use on weekends. The other day l noticed that l couldn’t hear the fuel pump running, l usually hear it when l start the engine turn. This morning l started it and drove it onto...

Is this the valve?

Hi, due to an advisory l’m looking to replace the brake pipes on my 2004 Defender. On eBay you can buy ready made brake pipes which l’m intending use. However looking at the ads there are two options, vehicles with a pressure reduction valve, and without. Did the 90 Td5 have this valve?

Thanks, that’s really helpful.

Hi, l’ve just bought some second hand terrafirma hubcentric wheel spacers. Can anyone advise me on the correct torque settings?

Yes, the vehicle is on axle stands. Ifl go underneath and manually turn the rear propshaft the front one turns.

Hi, l’ve got a bit of a problem, l’ve just changed the intermediate oil seal using the long bolt method and l’m just putting everything back together, however, l’ve noticed a strange problem. When l put it into high or low box l only have rear wheel drive, but when l put the diff in l have 4...

Thanks for the advice, l’m definitely going to try this method. How long did it take and can you do it by yourself, or would l need help?

Thanks, that’s a great help. It looks like l can replace the seals with out removing the transfer box.

Thanks for the tip, but is it easy to remove the box?

Hi, l have a Defender with a lt230 transfer box and unfortunately it has an oil leak that looks to be coming from Intermediate Shaft. Watching various videos it doesn’t look to hard to change the O rings on the shaft. But l cannot find any videos on how to remove the transfer box. Is it a hard...

I’ve check the earths and they look ok, but I’ve sussed out how the brake lights are getting power. The heated window tracks share the same earth as the high level brake light. When l switch on the heated rear window (although power is going to the window) it doesn’t work, but if l unplug the...

It’s 2004 Defender 90. I’m sure it an earth problem, but l don’t know where to look.

My heated window doesn’t work. I have 12v at the window and there is continuity so l know the wires in the window are ok. But if l unplug the earth to the window, the brake lights come on, so l assume l have an earth problem. Can someone offer guidance on where to look, or have any of you had...

Hi, is there anyone in the Durham area with a Nanocom, that can program a key fob?