Have a look here - www.REEDX.net Part 5: Switches and Wiring I can supply all of the connectors that you'll need, as well as 'pinout' and wiring information. .

Hi, Yes, I can supply a dimmer and harness for the D2 dash. I'll PM you. Cheers, Paul.

FRONT SEAT MOUNTING NUT PLATE - MWC2422 MWC2422 FRONT SEAT MOUNTING NUT PLATE | shop | www.lrseries.com £0.65 each (incl. VAT) .

For a guide on fitting the 2002 TD5 dash to an earlier Defender, have a look at - www.REEDX.net Wiring is not too difficult, and the proper connectors to fit the switches are available. .

You're welcome The FCX cubby box is a good bit of kit, you won't go wrong there The ready-made ISO extension off of eBay is a good idea. Although, you will probably have to release the terminals from the female connectors, in order to thread the wires down the duct from the upper dash to...

Making an ISO extension is easy, and your head unit will work the same as when it was in the dash. No faffing around with fused links, isolators, or re-running speaker cables. Most 300Tdi Defenders had only 1 pair of speakers in the front (4 x cables) + permanent live, ignition-switched live...

The MGF and Freelander mirrors use the same 'mounting slug' bonded to the windscreen. In the MGF it's part number is EDP5642 - Slug-windscreen mirror fixing - Genuine MG Rover at www.rimmerbros.co.uk In the Freelander it's part number is EDP5642L - Adhesive Foil - Rr View...

The TD5/Puma rear washer switch (YUE000070LNF) is wired as follows - Pin 1 - Live in from fuse box Pin 2 - Earth Pin 3 - Not used Pin 4 - Switched live out to rear washer pump Pin 5 - Dash illumination live .

You need rave02.iso from here - land rover rave technical system This covers 300Tdi Defenders and TD5 Defenders (from 1999 - 2001) 1. You can use a CD burning application to make a CD-ROM from the .iso image file. 2. Or, you can use WinZip to unpack the .iso image file to a directory on your...

Have a look at this thread -http://www.landyzone.co.uk/lz/f8/safari-5000-driving-lamps-wiring-diagram-203300.html I've posted details of how to do-away with the expensive and unreliable 'control unit', replacing it with a standard automotive relay. Doing this, requires the existing...

The dimmer that Lorri789 has pictured is on a Range Rover Classic, they were all fitted with them. But, they were fitted in a vertical orientation, to the angled lower facia, so they won't fit into a D2, which has its dimmer mounted horizontally to the lower edge of the instrument binnacle...

A proper Browning only needs one barrel :D .

Sealed connectors, such as the Econoseal, have rubber seals around each wire entry and a body seal, where the male and female halves join. You can see the Orange body seal in the Econoseal connectors on the left of this picture (and the Blue body seal on the JPT connectors on the right) -...

Any of the following can supply what you're looking for - Auto Electrical Components, Parts and Accessories for Trade and DIY: Polevolt Ltd Vehicle Wiring Products Ltd. Suppliers of auto electrical parts. Welcome to Auto Electric Supplies Autosparks, World leading supplier of classic car...

You can get the Lucas bullets and the 'snap connectors' (the 2-way, 4-way, and 6-way junctions) from most sources, including eBay. . . Most sellers only sell the Brass bullets, which are available in two types - solder - and crimp - But, the Brass crimp type require a special...

The 9-way sealed connector was used from the start of TD5 production (1999 Model Year). Earlier Defenders and pre-Defender (like mine) have the Lucas 3/16" (4.7mm) bullet connectors behind the O/S rear lamp cover. 300Tdi pictured - .

The connector is fitted with a rubber sealing cap at the factory, but I have come accross them, where water has crept into them and coroded the terminals. .

Not on a TD5 or Puma. There aren't any bullet connectors in the rear wiring, everything is connected using sealed connectors. As jimwyllie has said, there's a dedicated 9-way towing electrics connector (Grey) under the O/S rear wheelarch, behind the mud screen, which the 12N (or 13-pin Euro)...

That looks like the PeterLea towing bracket made by the Peter J Lea Company. I don't know if they're still in business as their website, which I have in my bookmarks - Peter Lea - Peter Lea | Graphic Design Home now goes to a Graphic Designer's website :( A quick Google came up with these...

Simtek sell that connector - 2 Way Land Rover/Bmw Lighting Connector | Automotive Connectors | Simtek (Uk) Ltd .