More shiny bits ;) Adrenalin 4X4 HD steering arms.

Got a few bits ready to swap the nose over on my transfer box. New input seal, front output bearing, front output flange kit, some washers for the switches etc and some long bolts that I'll make into aligning pins.

Quick pic from the forest.

SOLD

Fitted my 2+" braided brake lines and front spring retainers on Saturday. Now my axles can fully droop with no issues.

Awesome, looking forward to this! So sorry to hear about the 110, loved following that build.

Drives well, quiet and grips great. Flat in the corners but is sluggish for now till I get my 1.3 transfer box in anyway. Steering not quite as nice but I'm going to make an adjustable panhard bar to align the axles. Should give an improvement. Will also fit 3° front radius arms to correct the...

Ratel-X front and rear diff guards fitted.

My set of 4 tyres for sale £80 or £20 each. All on 6mm. Selling due to increasing my tyres size. Collection only or you are welcome to arrange your own courier.

Picked up some front spring retainers as at full droop my springs just start to move out of the spring seats.

Here's a few pic's of my completed adjustable j pipe center section. It has 10" of adjustment.

Thanks mate! I'll be looking after the whole truck, so no destroying it off roading etc. I just like to fit high quality parts and knowing that I can if I want to. I might do some light non scratchy green laning at some point. Its more built for adventures with my family. ACE and airbags are...

Right guys BIG update!!!!! Been very busy over the course of 9 12+hour days! Loaded up. Day 1 - Strip down ready for clean up etc. This involved front bumper with all panels and arch liners, rear bumper, rear mud flap brackets, petrol tank, shocks, springs, airbags, turrets, drop links...

Been playing around with the exhaust again trying to get that perfect sound without any drone etc. So first off I welded in a smaller centre box. This is currently on and being tested, in a few weeks I'll remove and weld in my adjustable length j pipe I made to cancel out the drone...

Yes should make things a bit easier! Cheers buddy. Big changes coming at the end of April.

The only issue that I've discovered since buying the box is that it doesn't have a high/low switch which means no throttle map changes or hill decent. Couple of options, swap over the front of my current case to this one or fit a manual switch inside the truck. No idea how much work it is or...

So I've managed to find a fully reconditioned transfer box with a custom 1.3 ratio done by ashcroft! This was done in 2019 but has never been used, only installed in the chassis. Not even had oil in it. The chap was doing a full galvanised chassis rebuild but got ill and had to abandoned the...

Done a few more jobs recently. My bearmach heater matrix hoses and my lpg hoses both decided to leak through the ends of the actual pipes where the braid is even know they are new pipes. Very annoying :( So I've fitted genuine heater matrix hoses and ash silicone hoses for the lpg. Hopefully...

Thinking of going for this https://simssuzukiparts.co.uk/products/5x-new-wurth-underseal-underbody-stone-guard-under-seal-500ml-surface-protector for the wheel arch liners and floor and then https://www.arc-rite.co.uk/corroless-s-rust-treatment-killing-inhibiting-primer-choose-size and...