1. TheKeymeister

    Breaking 300tdi Disco

    Just the mechanism or the motor as well?
  2. TheKeymeister

    Breaking 300tdi Disco

    Let me check the condition - I'm not convinced it isn't damaged to be honest May as well stick this here - it isn't having the most dignified end! Needed to drag it out of the garage it's in...the other half decided she wanted to do it Axle stands? Nah, wooden cable drums are fine
  3. TheKeymeister

    Breaking 300tdi Disco

    That's the plan, but it'll take me forever to get round to it, so having a spare unit to experiment with helps! Glad they turned up and you're happy :-)
  4. TheKeymeister

    Breaking 300tdi Disco

    Hi, going to save that for my one as I've got intermittent back window issues, sorry
  5. TheKeymeister

    Wanted: standard steel wheels for defender

    Mine aren't great either so probably not much good to you! Pair of Land Rover Series steel wheels - 88 / 109 | eBay
  6. TheKeymeister

    Brake caliper problems...

    I got sick of ****ty caliper pistons and not going back in, so because i'm too tight to buy a proper tool, made this now I no longer have to prat about with bars, slip grips, etc. although a G clamp probably would have worked too but this pushes it in more evenly across the piston
  7. TheKeymeister

    everything, series 3 breaking, gear box, wings etc

    I'm after a pair of front doors, preferably ones that are knackered at the bottom as I don't want to pay a lot of money and it's for a non-landy project so will be lopping the bottom third off the doors anyway.. what state are yours in?
  8. TheKeymeister

    Breaking 300tdi Disco

    More stuff gone... Front bumper sold Front grille sold Passenger headlight gone Indicators sold (I have got another set) Just gone and whacked a load of it on eBay, if anyone wants anything then let me know as I'd prefer to deal outside of eBay anyway the keymeister | eBay I've also got a...
  9. TheKeymeister

    Wanted: standard steel wheels for defender

    If you only got the three there, I've got another two that I've just put on eBay, give us a shout if you want them
  10. TheKeymeister

    Breaking 300tdi Disco

    Hi all, Steviecops - Rear bumper is bent on one side so probably no good - sorry! Gazdav- Your stuff has been sent today Tape deck sold to Stonehouse666 pending payment Darrog - Sorry unfortunately I need the entire box Snifflebag - I'll drop you a PM now :-)
  11. TheKeymeister

    Gypo's/Pikies.My V8

    Some time last year I think, I was parked up in McDonalds car park in Leamington/Warwick (Queensway) and an irish bloke actually came up to me and tried to flog me one of the 7 tellys in the back of his zafira...this was about 11am on a Saturday morning
  12. TheKeymeister

    Original jack or something else?

    Yeah that's where I got it from! Was about to buy one then bought a new Disco that had the jack still, so deleted it I then ended up helping change a wheel on a sprinter and couldn't get over how well built it looked and thought damn!
  13. TheKeymeister

    Original jack or something else?

    There was a bloke on eBay recently selling off blue Merc Sprinter bottle jacks, which are meatier than the red Disco one, £25 a pop I think :) Can't find it on eBay now but I think he spelt part of it wrong Edit: Someone beat me to it with the goods!
  14. TheKeymeister

    tmeprature sender sensor ?

    There is an adapter that supposedly fits the 200tdi housing that will allow the S3 sender to be screwed in (apparently it was used in 2.5 petrols?) Wherever I looked, the part was not available, or about 20 quid (sod that) I was lucky, mine reads roughly as it should with the standard disco...
  15. TheKeymeister

    Egr question, mine looks different.

    Sorry, misread your post, the MAF sensor is the big block with a heat shield in the inlet pipework - leave that well alone. The thing down by the headlight is EGR related yes, unplugging it should sort it out, though I wouldn't worry too much
  16. TheKeymeister

    Egr question, mine looks different.

    You need the mass airflow sensor for the engine to work! Just commenting on that's why the entire picture looks different, as the EGR probably looks different to accommodate the MAF sensor. I did my EDC one a couple of weeks ago, replaced the inlet pipe, unplugged the EGR valve, and used the...
  17. TheKeymeister

    Egr question, mine looks different.

    By the looks of it, your engine is an EDC one and that's why it looks different as there's a big great Mass Airflow Sensor to contend with as well!
  18. TheKeymeister

    Breaking 300tdi Disco

    Bump, loads still available, I've got a week off after Thursday so will be full blown breaking it and weighing it in pretty soon! As stated it's located in Rugby, CV23 but as I'm travelling to Stratford, London I can probably drop things off on the way if it's not too outrageous I don't have...
  19. TheKeymeister

    classic number plates ???

    I picked up some on eBay, that are pressed steel/ally, but in the yellow&black/white&black format with a legal font, that look pretty decent and didn't cost an outrageous amount, might be worth a look!
  20. TheKeymeister

    Offer: Coventry/Rugby to Wootton Bassett

    Will be doing this trip in an empty disco friday/saturday if anyone wants anything shifting If anyone on the way/nearby wants any disco bits from my breaking thread then get in touch Cheers