nice and cheap - that's a shultz gun right? how long is the probe? is it a 360 head?

Hi guys, I am looking to buy a gun to spray whatever cavity protector (dinitrol/waxoyl/owatrol) in the defender cavities. I am looking for a gun that has a long probe to that I can put into the holes of the chassis as much as possible + a 360 wand so that the cavity was gets sprayed all around...

nice @Clunkbucket ! do you have any pics on how you did it ? do you expect any challenges when removing the tire?

great to see this - did you take off the tires when painting the rim?

great, thanks guys! I bought 20L of Raptor since 1L should do about 3 square meters. 2 Questions: 1- As I started working through it I identified 2 bits that have rusted on the bulk-head. One is right at the edge of bulk-head and windscreen - how do you suggest to fix it? Second is in the...

Alright - I bought the new part number - hopefully it'll all fit well. any hints on where I can find some guidelines on how to replace these various seals?

@blue beasty what do you mean by second kit? I also found these two: DOOR HINGES: Nice as these have a head that needs a special screw driver to open. The auction says --> These Parts Are Metric And Suit Later 1998 Onwards Defender. Can Be Used On Earlier Models To Replace 5/16UNF Parts If The...

Sure I will post progress here - it'd be lovely if someone could put some responses to the questions posed :)

Hey guys, Next month I will be stripping down my 6x4 1995 land rover defender and repaint it the bodywork outside, the underseal and the interior of the bodywork in UPOL Raptor. Since I am using the car in the ‘bush’ here in Ghana and I will be overlanding in the near future, this bedliner...

ahah I get it now - the landy is british hence if we were to speak like americans it wouldn't bond well with us :)

@AI2O3 what do you mean by Merkin hood? Honestly here they wouldn't steal the hood/doors but the car altogether - I am putting a few securities just in case.. @bluebeasty what do you mean by the second one? the door hinge on ebay or the ones for the hood? Cheers, Simone

thanks! for screws for the hinges what about these ones for the door hinges? https://yrmit.co.uk/product/land-rover-defender-series-stainless-steel-front-door-bolt-kit/ https://www.ebay.ie/itm/Land-Rover-Defender-90-110-Rear-Door-Hinge-Security-Screws-Stainless-Steel-TORX-/253264640995 and...

Heya, After going through the whole parts book for body and chassis I think I identified pretty much all the parts I should change whilst stripping the car (about 20 parts). For the front door can you confirm that is just the weatherstrip and door sill seal? Mine currently has a 3rd seal as...

Thanks much - i have left a message to Mike on his youtubechannel. During rainy season it does rain cats and dogs or better suited for where I am: 'lions and giraffes'! Besides the ones mentioned any other seal that I should replace whilst I am stripping the car for the paint-job?

nice idea! I would still prefer to go with the security bolts - more than being worried for them nicking the doors or bonnet, I wouldn't want them to get in the car/engine as easily :)

Hello guys, I would like to replace the bolts on the hinges and hood since the ones i have are the standard one that any fool with a screwdriver can take out - do you have any that you can recommend? please confirm also the size needed for a 1995 Defender Thanks so much, Simone

Hello! Wheely, my 1995 Defender converted to 6x4, is to undergone very soon a complete repaint and I am going to take the opportunity to change all the seals. The seals I'd like to change are the following front and rear door seals: I see there are 2 seals now on each, one attached on the...

thanks guys, very helpful indeed!

Hey all, I bought my Landy (110 Defender converted to 6x4 by Carmichael) on auction and I have only one key - I would like to duplicate it to avoid regrettable incidents :) What do you recommend? does it have to be special key or can I just give it to a shop that duplicates keys and let them...

Hey all, I am going to park Wheely for a couple of months as I travel back to Europe. It will be in the company parking lot, so safe but no one will move it around, so I was thinking of placing it on axle stands, hence 3 questions: 1-I'll need to buy a jack to lift it - what weight capacity...