Discovery 300tdi 1996 This morning my car wouldn't start,it turned out the 10 amp fuse (no 5 in satellite 1) had blown for Anti theft alarm..... AA man (I'd tried everything to get it going) finally found this fuse had blown.....he didn't have a 10amp in his box so put on a 25amp. Car...

I'm liking that, so if there is fog, you don't bother with anything?

do you mean main beam as in high beam? Circumsise meaning you lopped the bottom trim off?

I want to fit some spots, I already have the ES spoiler fog lights, can I wire some spots up to these?

If you look on ebay there are is a sender unit and guage for £22.00 I found a local welder to make me a tank, there was a local steel place that bent me up a net of the box first,and measured inbetween the chassis and the sill under drivers seat. Took set out to fit drill for holes for bolts and...

I have put a tank under drivers seat, is about 25 litres, veg oil in the main tank at back, diesel in small one. would recommend both a return and supply connection as I didn't do this initially and was gobsmacked at how much the car draws (and obviously returns) whilst running, a gallon...

suppose get some aluminium sheet in there?

I'm in cambs what does it look like cheers

Disco failed mot on handbrake only 15% there's oil getting in there, put new seal on and felt last year, must be gone again, someone said check breather isn't blocked, so remove filler plug and blow through from engine bay? If it's blocked will blowing through clear it? Will the seal still need...

cheers landowner

had a quick look on there, can't seem to see the rear outer wheel arch repair parts, they have the front ones though I'm after the bits above the wheels inside if that makes sense?

how much was the egt and what make was it?

where would i find them to buy?

still got it?

I have a simbars steel one, bolts onto chassis behind bumper, no lights included £50 ono

Messing about today with the car, rear arches bit crunchy in places.....can see there are patches in there...should I just continue with the patchwork??

I need a tank connector for an auxillery tank for fuel pick up, ideally want to have an 8mm tail to connect a fuel pick up to

oh ok makes sense just seem to mist/gunk up round that bracket

Do these bends on the radiator leak? mine seems to have a slight weaping and possibly going down to battery tray

is the centre pipe fittable without removing everything else?