1. scrappyloz

    L322 l322 have to reset tc, abs and brake pad light every start 0x0005a

    Cheers for the diagram. My hdc and low range switch works fine. I will check the contacts on the abs plug tomorrow. I have now lost air suspension with fault codes showing loss of communication with the vehicle dynamics module and steering angle sensor. u0122-87 and u0126-87. I will also...
  2. scrappyloz

    L322 l322 have to reset tc, abs and brake pad light every start 0x0005a

    Hi everything else is good with no other fault codes. Im using autel maxidas which is pretty good. If i cant get to the bottom of it i can get hold of autologic. If i reset the system (tuning steering wheel left to right etc) eas and hdc function perfectly
  3. scrappyloz

    L322 l322 have to reset tc, abs and brake pad light every start 0x0005a

    I recently got a 2006 l322 (last of the td6) l322's in and it has a really random fault i havent come across before. Every time I start the car i have to turn the steering wheel all the way to the left and right to reset the tc abs and pad warning light. If i turn the car off and i wait any...
  4. scrappyloz

    High amp winch rocker switch

    I have a superwinch atv2000 winch on one of my quads. The winch does not run a solenoid pack but runs a high amp rocker switch on the handlebar to run the direction of the winch. I have put a link below of the switch. Unfortunately mine is completely shot (water ingress over years) does anyone...
  5. scrappyloz

    Defender 19j to 300 tdi conversion temp sender

    Well finally got around to changing it and its exactly the same so i assume its not the correct one. oh well
  6. scrappyloz

    Series 3 really need help from experienced members, she might have to go.

    Seeing as it had a headgasket issue and had used coolant etc, Theres a good chance the previous owner used k-seal or a similar additive to hide the symptoms which does cause blockages in the rad. Dont even bother flushing it just get it re cored or replaced (NOT BRITPART)
  7. scrappyloz

    anybody heard of a driven trailer

    I swear that there was a sankey trailer that had a driven axle of a pto
  8. scrappyloz

    Defender 19j to 300 tdi conversion temp sender

    I dont really want another gauge in the cab as before you know it i will be fitting egt sensors as well :) i ordered AMR3321 which should hopefully fix it
  9. scrappyloz

    Defender 19j to 300 tdi conversion temp sender

    Ive done a few 19j to 200tdi conversions years back and every time the 200tdi sender sends the 19j gauge into the red at standard operating temp. Im sure the 300tdi is the same. You cannot fit the 19j sender either as its a completely different size. Is a 300tdi defender sender different to a...
  10. scrappyloz

    Defender 19j to 300 tdi conversion temp sender

    Recently purchased a 1988 defender 90 that has had a 300tdi engine fitted in place of the 19j. It has the typical problem of the temp guage sitting just below the red as the 19j gauge and 300tdi sender dont work together. What sender do i need to buy or does anyone know if i can fit a resistor...
  11. scrappyloz

    series 2a 109 recovery truck

    You can see by the front dumb irons
  12. scrappyloz

    series 2a 109 recovery truck

    the chassis had completely broken through where the front axle joined on that one :)
  13. scrappyloz

    series 2a 109 recovery truck

    one of mine from a few years back. Was bought by someone for resto
  14. scrappyloz

    LR3 engine issues

    Have you checked the cambelt isnt broken? check cam is truning through oil filler cap. If it is turning check you have fuel pressure. The rear hpfp belt could have broken
  15. scrappyloz

    Overheating 2a diesel

    Probably rad is blocked. Seen it many times before
  16. scrappyloz

    Daisy got us home - eventually.

    Random question but have you checked the ecu plugs havent got oil in? Pull the ecu out and remove the plugs and see if full of oil. The oil travels up the wiring harness an causes issues i have seen it numerous times. Use electrical contact clearer oinly
  17. scrappyloz

    L322 Really weird Parking sensor fault. No Power

    I have a 2003 L322 and im having a really weird fault. I brought the car recently and had a faulty front left sensor. I replaced it and my parking sensors worked fine for a while. I had a flat battery recently (left interior light on) since then my parking sensors do not work at all. No noise...
  18. scrappyloz

    Will the P38 out last a L322?

    Lol l322's suffering from rust, clearly has no idea what hes talking about
  19. scrappyloz

    L322 Risks of buying a 02 L322 3TD with 250k on the clock?

    4K is not a bargain for a 2002 with 250k I would suggest looking elsewhere for a lower mileage vehicle or offering much lower than 4k
  20. scrappyloz

    Sport 2.7 tdv6 Sport hesitation issue

    btw thought would let you know the issue turned out to be the torque converter