Is tnat a member or a web address ?

Any tips on removing it without dismantling the car ?

It’s the rear bags need doing.

It does indeed. But now I have a matrix leaking into drivers footwell. Only replaced the seals a month ago. More cleaning abs new seals needed. But only a minor problem. Have re routed water for now :). Other P38 V8 LPG having head gaskets done AGAIN. But I have a nasty feeling it’s the...

thank you i will

Last update on this, passed MOT with flying colours, just one advisory on a suspension air bag needs replacing soon, I can put up with that after all the work Thanks to all that helped me out A Very Happy MaDbrIt

2003 TD6 Auto Hi all, got a strange one, the indicators have stopped working on the instrument cluster, they work fine outside the car, all lights working as they should. But yesterday the tell take click click click went silent, thought they all packed up, but just instrument arrows, nothing...

‍️Not good

Yes that’s it

The pressure release valve is the brass valve attached to the lines in the wheel well I assume

If at first you don't succeed, there's always a Gin & Tonic

I have the Series 2 Nanocom with full access to Motronic Gems & EDC (P38) I am in the Bath area, if anyone needs a diagnostic / fault cleared PM Me

funny, my son helped with the calibration and he said lets do it a few times to make sure, so will leave it a few min between, Thanks

I will check that thanks

Well i never. Plug the diagnostics in. First make sure all is working. Pump ok. Tank holding 8bar. All valves working. Headlight adjuster ok. So I think let’s do a calibration. Directly that was done. Turn ignition off re start car and it all comes to life. Well I never. But there was no...

What is meant by HARD FAULT and what about the battery ? What do I check for ? Charging rate. Volts amps ?

yep they all work, just no response from the air suspension controls, By no lights i mean no height status lights

Hi all, just bought a TD6 2003 Auto It has No Suspension Control Panel Lights and no controls work on that panel also compressor is not working so no suspension ;( No warning On Dash Saying Inactive ??? Any one point me in any direction As my nanocom will not work and never will on this car...

YAAAAAA SUCSESS I bypassed the two plugs on the left by direct wiring, replaced the OBD plug (just in case) and the SRS light now goes out after 10 seconds Thanks to all who helped in this. much appreciated And thanks to brianp38dse for suggesting the soldering aid pliers, made life a lot...

I must admit that was my thoughts, thanks for the link, makes things a lit easier