mondo, I think you might have got it the wrong way round the bosch is the original with the air temp sensor incorporated and the pierburg does not. you can use the pierburg MAF with Rover rons tuning box.

Thanks again doobreydog, your a star.

Thanks doobreydog for the info, I have just ordered a elm 327 and will try it out when it arrives, if I can find some good software to put on the laptop. Where did you find the fault codes?

Hi, do any of you guys know if a 53 plate (January 04) Freelander TD4 SE is OBD2 compliant?

Thanks for all your help, you have saved me time and money trying to fix a fault that is not a fault.

Thanks for that chuts, does this happen on all freelanders? or just yours and mine. All freelander SE or HSE owners let me know.

I have searched the internet for hours looking for this control relay but have not found any. Do you think I should order From LR and do you think the control relay is the problem?

Sorry I just looked at the link, no its not the correct relay, thanks mad hat man.

Well the first part of the number is correct, do you have any more info.

Hi hope some one can advise me on another problem with my 53 TD4 SE, the electric folding mirrors have a mind of there own, some times they work ok other times one mirror will not fold and other times both mirrors wont fold. I have removed the control switch and cleaned all the contacts and have...

:p I have had a look at the circuit for the FBH and if you want to fit a dashboard switch to stop the FBH from starting this is how its done: locate the air temp sensor and connector, (behind r/h/s of front bumper) the connector to the sensor is co714, pin 1 (brown/yellow) is a feed signal from...

go on then tell us

some one will come up with a good cost effective solution is just a matter of time.

Thanks to Mondo and Ming for all your help, you see you do have all the answers it just takes a little gentle persuasion for you to tell all the secrets of the Freelander, was the Freelander built on the planet zog or is it zoog.

Does anyone have the answer, why remove the IRD output shaft and then blank the hole with the said blanking plate, what the hell for?

Mondo, I know you don't need one, just cant understand why anyone would want to remove the output shaft from the IRD and then blank it off?

have a look at the fleabay link Freelander IRD Blanking Plate on eBay, also, Land Rover, Car Parts, Cars, Parts Vehicles (end time 17-Apr-08 18:49:39 BST)

do you know any thing about the IRD blanking plates sold on fleabay, why would you want to remove the output shaft and then blank the hole?

Thanks mondo, any problems with the mot?

I am thinking of doing the mondo mod, is it best to remove the complete prop shaft system with the VCU or just the rear prop shaft leaving the VCU and front prop shaft in place. I have read all the mondo mod threads but it don't seem to answer this. Would there be a problem with the MOT if...