Im off to do this now strangley enough for 2nd time but with better oil

Replace the pressure delimiting valve and filter for a start £25 from LR Sits near injectors and takes 30 mins to replace

Can you get aircon belt on without taking off main aux belt, I only really need to change aircon

Oil Cooler ?

Has anyone had the plastic part replaced with ali chequer plate and welded onto the sumpguard frame ?

The expansion bottle cap is known to leak but 1 litre a day is excessive for a cap My cap leaked and it dripped from around o/s of sump tracking down the pipes

If you have 16" alloys on as standards Can you fit 15" steel wheels and tyres to suit Looking for some spare wheels to off road in rather than risk damaging the alloys Or anyone know of any 16" that will fit

Are you sure its not from the aircon, The aircon still works when switched off if set at screen settings Set to floor and run for 2-3 days and see if still leaking

You will need to jack up another wheel aswell to make em spin Pads are very easy to fit on these and discs & pads can be bought cheap enough

General opinion is they dont make much difference and the oil has been suspected to damage MAF sensors, Ive not fitted one for these reasons A clean out and Bypass of EGR and a Rover ron seems to be the best value for money

Anyone changed them on a TD4 They look a bit awkward to do (not much room) What size is the nut on the tensioner to remove the belts and did you remove the engine mounting Thanks

Did far better than me, Slightly bigger wheels and the clearence and he was down in about 1-2 mins where i took about 6 carefully inching downwards http://www.landyzone.co.uk/photopost/showphoto.php?photo=9978&limit=recent

Sump guard needed i thinks, Didnt realise it was this close today ! http://www.landyzone.co.uk/photopost/showphoto.php?photo=9973&size=big&cat=recent&limit=recent

how did u know North Yorks Moors from Pickering to Teeside

Evening all Came over Rudland Rigg this afternoon in the Freelander Closely followed by a group of about 6 discos Anyone from on here ?

They have been known to damage the maf. Some think its due to the oil in the filter, No hard evidence its the filter though

Theres some dodgy maf's om ebay, Disconnect the maf anf the tuning kit and see what happens

Tip2 Only put the really needed bolts back, it will save you time removing them next week !!

Have u tried running with maf disconnected, where did u buy maf from ?

My auto has fallen from 34 to 30 since the cold weather. The only other thing is i have filled twice with Tesco and normally only use Shell, Tried Shell this week to see how it goes