I did undo outlet from lp to filter and did have a squirt( not sure how much is good) But when trying to undo the nuts on lp the top of lp was spinning with the force. Is this normal? Also the no fuel coming from fuel filter when engine running is normal? Cheers

Sorry mate. Where are the screws? Do i need to remove wires and pipe and knock the tabs with a hammer like a fuel pump to find them? Im a novice Cheers

I dont know which one is the pick up.. this is what i haveunder my seat. . There is no bubbles on this clear pipe when running. Tried with out filler cap and no difference.. with the bleed screw on filter undone should diesel spill out while idling?

Not sure how to open tank to find filter.. after i set off ok it losses throttle. Tries to stall. Big white smoke. Accelerator pedal does nothing while this happens. Have to restart or pump pedal. When i use lift pump lever to bleed air.. the fuel comes out of loosened bolt on filter housing...

Sorry its a disco 200tdi conversion

Hi guys . Me again. Since i got through mot the beast kept stalling. I replced the fuel filter. And was still the same. .. but as a drove it to a garage all was fine for a few days so i thought changing the filter sorted the problem. But alas it still does the same. Basically i get in, turn...

Cheers yes. Seems that changing filter fixed the runnin issue. Dan

Ignore that. Just didint run it in enough lol. Thanks fer info

Hi guys me again. Only used the landy a couple of times since removing rear prop until i get new one... But now im having problems where i put my foot down nothing happens for a while. And when coming to a stop she nearly stalls.. Just replaced fuel filter to rule that out. Any advice...

Ok changed it. But landy still erratic. One minute i rev and she goes. Next she takes a while to kick in. Plus she almost stalls when coming to a stop. Any ideas ?

Oh i see. The video just loaded up lol. Cheers.

Cool do i just undo the plastic wingnut undertneath?

Thought they just unscrewed then screwed on lol.

Sorry giys . Any idea how i change it? Cant seem to find info

Cool. Jusy wanted to try changing it as. Has started running rough. Hoping just needs a filter

Hi guys. Could anyone reccomend a good filter to replace this ? Thanks in advance.

Plus the beast is a whole lot smoother running with the rear prop off

Just an update.. i cancelled the uj order. And going for new prop. One reason is that i cant pull or push the splines in and out. Also where its been vibrating there is chunk out of the yoke where its been grinding against the bolts and a couple of the bolts have been ground by the yoke lol.

Just an update.. i cancelled the uj order. And going for new prop. One reason is that i cant pull or push the splines in and out. Also where its been vibrating there is chunk out of the yoke where its been grinding against the bolts and a couple of the bolts have been ground by the yoke lol.

Cool just what i needed to know lol. One more question for now. Do i have the little gearstick on high lock? Ie just pushed over from right closest to me.. to the left?