I started this thread stating that I have an RRC. It is a 1994 " VOGUE SE 300Tdi AUTO on AIR". It is not the downstair's maid's shopping trolley ie.(freelander/evoque, etc.). Such cheek! For the " RANGE ROVER " members I have ordered the KATSU ramp's ...

Are you "pair" commedian's or comedian's.

double post

I agree about the degradation, I think it is accelerated by leaving item's in the sun! Apart from that I can't see anything else on offer with these spec's, delivered to my door for fifty sod's!

Datatek:- 7 ton per pair, tested to 12 ton per pair. Phenomenal weight for plastic/polypropylene?

I have an RRC ,looking at "KATSU 161918 " ramp's anyone any info.? They are 305mm/12" wide so would seem suitable.

Anyone got a detailed report like this for the EAS on a classic? Great job Range Roller dt.

T Took your advice and got very fast del.today. I got the soldering iron etc. out expecting to have to swap the round plug with my sq. one. I found that the bulb holder could be swapped around with no problems. The round plug was used until 1986 then the square one later. A massive...

Thank's.

Will 1999 P38 alloy's suit a 1994 RRC ?

Thank's for the reply. I was hoping for a set with new bulb holders, like the one's you spotted.

Great value ,well spotted. I am in need of REAR light clusters anyone know of good value ? Cheers.

Thank's for the welcome and all the interest. As for removing the filter not a problem . I have chain type and clamp tool, also hammer,chisel and ring spanner, as a last resort! The reason for this question is last time I changed filter I unscrewed it no problem -- then let it fall it got...

Looking for opinions on relocating oil filter housing on a 300 Tdi . Could a Mr.Gasket M 680 kit or similar be used, would there be an oil pressure loss ?

Hi, New member with a :- Range Rover Classic Vogue SE 300Tdi Auto. Can the filter housing be relocated using a kit like Mr gasket M680 or similar. I would be concerned about losing pressure . Thanks in advance.