anyone ?

wondering if anyone can shed any light on my electric window problem. Passenger electric window did'nt work the other day then went out in car again 2 days later and it worked, now its stopped working altogether. Removed door card and noticed that the mechanism had split by the motor, replaced...

Will do andy and many many thanks for all your help and info mate , much appreciated. will let you know how i get on. gloves

UPDATE: Got hold of another working ecu and plugged it in same problem no change however on saturday i thought i might try my pc to see if i could unlock it but when i hooked it all up and run the program and pressed initialized in the rx buffer all i got was "PP" once and nothing else, pc has a...

hi andy might have another ecu to try on mon or tuesday hopefully will get to the bottem of it and find out what the fault is lol, not much more to change or check.

thats it i've had enough now dont know what else to try, replaced the compressor and a suspect height sensor, still cant get the lights on the dash to go out, can do everything else with the software from storey (many thanks) just can not unlock eas or turn off extended ride height light on...

Many thanks for your quick reply, in the rx buffer i get all "ff", have tried with the serial usb and a laptop with dedicated 232 port both the same, i can turn the pump on and off i can get all the readings from the calibration part of the software, i can get the heights of the sensors and when...

tried it with a dedicated serial port on laptop but still the same, dont understand it will send some communications but not all, or will do some things but not all, maybe someone else may have had the same problem and shed some light on it, might see if i can get another ecu and see what...

will do mate , the only other thing i can think of after scouting about the net and reading up loads of info is that maybe the usb 2 serial i am using is the culprit, going to see if i can dig out my old laptop with a dedicated serial port on it and try that way, will keep you informed and let...

checked out the site but to no avail, just can not understand why i can do some of the communications with the software but not others, will have to perservere and keep trying i think. Any other idea's ? andy many many thanks for your help and patience mate.

downloaded story's software off his site rsw solutions, did'nt go anywhere near wiring for suspension when fitting lpg kit all i done was jack the rear ns up but the wheel never left the ground , thanks for the web site will check it out. gloves

hi andy did'nt make any difference, still the same driving me nuts now lol, what i did bnotice was now when i ask for the ride height sensor readings it says they are all at therie heighest point which i know they cant be as the car is on the bump stops, dissconected everything , initialized...

going to try it now mate back in about half hour, appreciate the help mate thank you. gloves

ok gave the pins a clean with a toothbrush and some wd40, reconnected the lead run the software initialized properly, when i read faults no matter what i do with the " 1 delay slider" i always get 255 255 255 255 255 in the boxes above the fauults panel and all faults displayed, i can run the...

sorry mate didnt have a chance today , will be doing it as soon as i get in from work tomorow, will let you know how i get on.

ok mate will do, thanks again

yes initialized the software all initialized ok all "ff's" in rx buffer didn't check for corrosion on socket will try that tommorow bit late now, but would have thought that if the software initialized and gave me value's back about the callibration settings and i could turn the compressor on...

you need a copy of "rave" cd can be downloaded from the net, all the electrical diagrams are on there

PLease help shed some light, 1997 4.0 p38, fitted lpg to my rangie upon completion drove car out of garage and would not rise and then had the "slow 35 mph" message appear, made the lead according to storey's specs and downloaded the software, plugged in initiallised and bgan to read faults, but...

hi mate had exactly the same problem with my p38, spent 2 weeks checking and rechecking everything finnaly found out what the problem was, take the trim that runs along the bottem of the where the door shuts on the passenger side and you will see the wiring loom that goes in to the eas ecu...