Thanks mate just had one in the shed Peter

Hi Guys can any one tel me if the cooper Z1159 oil filter is the same as the ERR3340 I think it is just double checking. The car is a 1998 4.0 Range Rover. Many thanks Peter

Hi Just checked the Cats and they are not glowing but i do get a rattle when its throtled hard sounds like it could be loose or broken bits in the cats may be,

ill check

there doesnt seam to be any leaks so far

There is no LPG no mine Not realy sure what you mean there !!!!! Peter

Hi guys Can any one help with the next problem I have with my 1998 P38. It has a very anoying miss fire through the rev range I have fitted new HT leads and new plugs and this sorted it for a short while, but its back. Test book has shown no problems and I have had nearly all the sensors...

Yer guys i checked the that switch and it is the black and yellow one. I just had a look in the fuse box RL 10 is fitted But the 10 amp fuse in F40 was not there, Wills you are the BEST I fired it up and it is working. Now guys you may be thinking, why did he not check that to begin with, well I...

Hi I have put it all back together and the servo's are all working ok the A/C still not coming on Have taken the washer out of the clutch Made no difference,there is no power to the clutch, I conected it straight to the battery and the compresser comes on I checked the voltage at the dual...

Hi Wills thanks I will check it in that order but have check it all sorts of ways. I do have the Rave CD but I do have diffculty in understanding the wiring diagrams. As i have said I live in Dubai so all sorts of things could of happend to to car before I got it with the very high level of...

Yer nI ahve replaced the presure switch a few months ago and it was all working fine untill i took out the old servo's

I live in dubai and this is a very common conversion although I think Range Rover buffs in the UK dont like it. I think The springs that are used are Disco springs. Good Luck Peter

Yer thanks Irishrover thought as much I no how the A/C should come on and off but for some reason its not coming on at all May this has to be reset by test book as I have fitted a new ATC ECU

I have now fitted the distribiton and blend servo's and rebuilt the recirculation servo's and now seam to be working ok. I have read a little more on the system and the distribtion and blend servo's have a feedback potentiometer which i think has to be under presure/resistance. I think the...

checked the clutch thats ok

Hi I have just replaced mine its very easy and if you mark the UJ with a centre punch before you remove it it will not need to be balanced.remember to put the grease nipple back in the same place also, even though its new i always regrease it . Good luck

thanks I dont think the A/C compresser or the clutch is the real problem as this was all working ok with the old ATC ECU the problem has only started when the servos and the ECU has been changed it has been restarted with test book but still no luck. It has had a new fuse box fitted and I have...

yer its got gas but the clutch is not kicking in

Hi Guys I have a 1998 P38 and been having air con problems. I live in the Middle east Dubai. The problems started with the Blend and distribution servos not working so I started by replacing them but the new ones did not work, it was then put on test book and I was advised that the ATC ECU was...

Hi All A question? When the engine is started should the fans at the front come on, or only when the A/C is switched on and the temperature has risen in the heat exchanger. Or can some one explain how the hole thing is supposed to work. The Car is a P38 4.0 Lt 1989. I live in the...