Thanks Ed.

Well done, think of that on your own?

Just had a fault message on the screen on my P38 which states "RH Front Window Not Set" along with the audible alarm. Does anyone know what this means?

Where are these located and how do you change them. I have the same issue.:confused:

G'day If the diff on my vogue was on the way out what would the symptoms be? Still having this problem with the rumbling whilst moving. Changed the hub on the side that I thought it was as the noise lessens if I go round a right hand bend.Checked the prop shafts for and play as it might...

The handbrake was off, I used the chocks to stop it from rolling, and put it in Neutral.

Parked the car up, slight incline, not sure if that will affect the result, but, got under the car and twisted the propshafts and try to move them up and down, front and rear, but didn't seem like there was any play in the UJ's. If they were shot would it be obvious? Not sure what else to try...

Dopey, thanks for the reply. Followed the lead but couldn't find advert, pictures etc. Will keep searching. Thanks again.

Thanks Dopey, will try that tonight. If it is the UJ's is it much of a job to change them?

Ian thanks for the reply. Is this a difficult operation? Is it the propshaft or the driveshaft?

Hello all, well, I changed the drivers side hub assembly, the disc's and pads all round and still I have the rumbling sound, which in fact has also turned into what can only be described as a "wobble" not huge but when driving I notice the passenger arm rest vibrating in time with...

The sensor is a good fit. I didn't want to push it in too far in case I damaged it. Not the cheapest thing to buy! Will try tapping it in further.

Just Change mine, Also replaced the ABS sensor. Problem i have now is computer is reading, ABS fault, Traction Failure. What have I done wrong? Is there a reset on the ABS system?

Rick Thanks for the help. Changed the hub. Now I have problems with the ABS. It's reading a message, ABS fault, traction failure, which will be a connected issue. I could not budge the ABS sensor whilst changing the hub so changed the hub with this in situ. Therefore I have obviously damaged the...

I have bought what I thought would be the complete hub assembly to change the hub on my x reg Vogue. It is a used part and looks like this only dirtier. Is this easy to fit or is this what I need a hydraulic press to fit to the rest of the unit?

Will thanks for that, I'll have a look.

G'day I am looking for an update for my SatNav system. It's the OE in my X reg Vogue. I keep going down roads which do not show on the map. Must be a very old version of the CD that is loaded.

Reading through ALL the threads to try and find answer, I am inclined to think it could be the wheel bearing. Could that be it?

:confused: Recently I have started to have an issue with my 2000 Vogue, It seems to have a slightly annoying requirement to head off road. In that, it has a slight pull to the left if I let go of the wheel. I have had the tracking checked but it is no better. What would your suggestions to the...

Cheers all, will get it checked this week.