it will do. You have a chinese chipset, so you need their driver. You might get away with the driver from this page https://learn.sparkfun.com/tutorials/how-to-install-ch340-drivers/all Before you install it, you need to delete any Microsoft...

That's gonna costa lotta. "How much" "¿Cuánto cuesta?" "Combien ça coûte?" "Wieviel kostet das?" "Quanto costa questo?" "Quanto custa isso?" "Zhège duōshǎo qián?" "Kore wa ikuradesu ka?" "Yeh kitne ka hain?" "Сколько стоит это?"

nope. but in the Details tab, change the Property to Hardware ID. you can then copy the Value string, and paste into Google search.

COM4 should be ok. Not tried a Chinesium USB Serial for many years, as I now use an FTDI adapter on both my Macbook & windows for various serial stuff. The error you got looks like a windows driver issue.

The SW doesn't like the port selection, or the driver is not loaded correctly. Do a screenshot of the serial port details.

Easier than that. Click the Insert Image icon, and either drag the image over, or click the box & find the image on your device.

It also depends on the wiring in the 9pin-D connector to OBD connector cable. If this is wrong then no USB serial will work. Where did you buy them ?

Exactly. Does make me wonder who thought it a good idea to put rubber in the one thing that softens it !!

or with "brands" we never heard of !! Must admit, I've had some crap from them, but also some quite good stuff.

Avoid anything with "wet cambelt" engines !! My son tells me the number of replacements for those was unbelievable over last few years. Essentially the oil contaminates the belt resulting in de-lamination, tooth sheeding etc. Much more...

On the basis that you already have socket wrench, etc. get a set of imperial sockets like these from halfords...

Imperial bolts. It would be a good idea to get some an imperial sockets. Most of the engine need them.

Take offside wheelarch liner out. Easier access then.

Do either of them meet the low emission zone requirements in Austria ? In London, the 4.4V8 generally meets ULEZ, but the diseasel does not.

When those manifold bolds are rusted & rounder, I found hammering on one of these spline sockets enables them to be removed.

The problem is the manufolds obscure the head bolts. When I did my engine rebuild, I cut away the flange to allow access to the bolts in future. The bit cut off doesn't make any difference. For the manifold they need a decent 12-point socket...

Given that both have similar M47 engines, does anyone know if the 320D injectors are the same as the FL1 TD4 ?

+1 on don't take the nut fully off. If you then wobble the wheel left-right it will loosen the splines easily.

Open Windows Device Manager. Expand the Ports section, and then open Properties. Then in the properties box it will show the cable hardware manufacturer.

Very clean. Dark blue I think with light interior & Vogue badge on the back. Driver didn’t even turn to acknowledge my wave.

Best to do it without & then with a drop.

Saw a rather clean looking RHD P38 on French plates on the A41 today.

£15 on Amazon.

Yes 10 studs per head, so 20 total. Do shop around just in case. Realsteel were cheapest genuine Arp when I bought mine a few years back, but you never know !

Both mine have one…… I think.

We used petrol on a TD4 cooler with no problems. A thick rubber glove on each end after putting in about a pint of petrol, and lots of shaking it around. Then drained it & did it again. Finally left it upright in the sunshine to dry out...

Just make sure the AI doesn't add something for it's own purposes !!

Exactly. A full HG kit is around £100 depending what you buy. Adding ARP studs & maybe a selection of other nuts & bolts is another £200. At least 10 times less than liners & essentially a full rebuild. If the liners are slipping they...

There's several things that will stop EASunlock talking to the car. 1) As Keith pointed out above, the USB-Serial driver install needs to be done in the correct sequence. you must uninstall the Microsoft windows driver first. (see below) 2)...

This one worked for me