Mornin Fresher today Nothing planned, lazy Sunday Stay happy all 🙂

It's a bungalow and I always leave the living room stat fully open because that's where the controller is. I keep hall, bedroom and bathroom at a medium heat and living room an kitchen nice and cosy. All pipes go into the attic and drop down into each room, I moved bathroom pipes to drop down...

yes, hallway , rad just needs a wet coat on now to finish

Might do this year Romanian guy next door says to eat em 🙂 (seeds)

My 15mm pipe bender doesn't do tight bends, only similar to the one in the picture that's why I thought 10mm pipe would be better, My brake pipe bender does 10mm so pipe should be hidden under the radiator, I'll paint the exposed pipe to match the wallpaper and tidy the trunking up so it...

I finished the plastering because it wasn't straight Plumber and joiner fitted skirting and radiator on same morning working together I've since replaced the architrave and now replacing skirting and tidying plumbing up

This is the wonderfull job workmen did after plastering the walls 🤔

Your right I spose I don't like compression joints on show so rather than solder a bend in I was thinking I can get a tighter bend in the micropipe so it looks neater. I also have a part roll of micro pipe in the shed and the rad needs a new valve anyway so cost wise it isn't a problem. I dont...

Problem is more than visual Old skirting was only 2" high and one pipe ran above and one along the wood Pipes need to be bended outwards to clear the skirting as they don't (and never have) sit nicely on the wall as they come down So either bend pipes to fit and leave ugly set up as is or cut...

Problem (maybe) Looking to replace these pipes from the pipe cover to the radiator. 15mm to 10mm elbows then 10mm micro pipes along top of skirting boards to rad. Reason is so I can lift pipes higher and get tighter bends to rad valves, should look neater than what's there now. Is there going...

Its like riding a bike, tall gears are more difficult to pedal, you have find the easiest gear to maintain speed without too much effort, all depends on hills, wind and energy.

Mornin Sunny again Feeding the bees, had three on it but time I got phone out two had moved on. Cracking on with skirting boards today. Stay dry all 🙂

I went straight to window suppliers, picked windows, gave em measurements and had them in a few days. Smallest was 90 quid, largest 200, few years ago but massive saving

Afternoon Warm and dull Fitting new skirting boards to me hallway 😎 Tallest sunflower now at 8' 6" , starting to open flower up so I suppose it's done growing now 🤔 Think me kidney stone either parked it self or moved on somewhere, either way it's not a problem thank goodness. Not painted...