Big roll of news paper normally stops them. Better than fingers to test if they are working.

Knackered fan ?

Definitely a defender type truck cab. I know when I took the glass out it was a snug fit & re used the rubbers

the thickness of the glass,thickness of panel and overall diameter will affect the fitment try Direct Seals they do a good range of clayton seal

Does the new seal look the same as the otherside? Take a photo looking from the front of the truck cab,they are a different shapes for series/defender

erm ... next time i disconnect my handbrake ..... it poped out wihtout issue now :vb-groan2:

Thanks for the reply. I'll move them in a bit then, more central to the quarter panel or a ⅓ in? I've fitted the reflectors onto the crossmember at the outermost points, as that's where they were previously.

Bring the fog/reverse in a bit(if you have handle to affix) Also need space for the red reflectors for MOT

Oh and I’ve found the ideal spray booth ! Forget building it in the garage! I’ve just been granted planning permission for an extension on the back of the house replacing my conservatory which we seldom used for a 8x6mt kitchen / family room, so...

The seabelt points on the rear tub are now drilled and ready for final fit: And the LH B pillar is done too: Just need an hour or three to get a clear run as the sealant wont give us a second chance. Time for a few patch repairs on the front...

l think you're right. The only Ineos Grenadier classed as "Commercial" with HMRC is the two seat version. l don't think the Puma 110 Utility (5 seat) is classed as a "van" by HMRC l would have to just keep it as a private vehicle and charge the...

Little MG had a car pull out on it on the way to the ferry in Portsmouth. Had to have a be headlamp fitted(we supplied the landrover one which fits) Day later diff seized and was loaded onto a trailer. Driver & passenger had spare seats in the 2...

You DO have to have all your documentation. Driving licence. V5c (not a photocopy) Insurance certificate with "green card" type bit in many languages. And allegedly even your MOT. We carry all of the above.

Based on my S3, if similar could it be a hole in intake pipe in tank allowing air to get in when level drops

Have you seen his freds :). He will have you a TD5 and spending money the minute you see it, let alone a drive:D. J

I thought all pick ups were now high tax for business? Even if you remove the seats it’s still taxable

120 miles of working today. Moving hay horses and junk for people Added 50ltrs of fuel

Just spent the past 2.5hrs undoing and freeing up one front radius arm bolt, one more to go tomorrow. Seriously thinking about taking up stamp collecting as a hobby instead!

https://yrmit.co.uk/product/fuel-filler-neck-lr-defender-90-83-98-not-td5/

Yes price is per kg, not sure how much that is at the moment. Previously Ive sent them to Roften in Merseyside but this time they are heading to Shropshire galv.

I just use AirPods when needed

I removed the radio as I couldn't hear it 😄 Can't see me putting one back in unless I change the engine or massively soundproof the vehicle (neither of which will happen). Pete

Where you going to fit the wireless? Sorry, in car entertainment.

Where/who are you using for galvanising ? Are they still charging per weight? (Not had much done for he past few years & good to keep up with the things)

I’ve had two bulkheads galvanized so far and had no issues, if they do decide to drill a hole I can always fill it in with lead solder before painting, I’ve used this method on galvanized front bumpers to fill in the end cap holes. Beauty with...

Have you put a drill/drain hole on the door pillars of the bulkhead? They classed mine as a sealed tube & drilled a hole in each side Stuff always look good when re galved

"You're old and you smell of ****".

I keep trying to instil into you all, us re-tyred folk have six saturdays and one Saturday every week :cool:

What are these days off you speak of? 🤔

Happy Easter forum family…. For the workers,enjoy the extra days off For the roldies it’s Friday today just incase you forgot