Mot on Monday so thought I'd best patch the holes in the passenger footwell. My Dads brill at all sorts of fabrication so he welded and answered the million and one questions my 10 year old had, lovely to see! It's a bit of a bodge but if it...

Lots of lube required ... ooo Matron ...

Hi max, I can’t actually remember the exact details but when I look at it it will jog my memory. I’m pretty sure dippy is right and where you have your black circle there’s spot welds. In the corner itself, there’s an actual box structure made up...

Brilliant, thank you! Just ground all the sealant and paint off and I can see the spot welds now - had to go back a bit from the section I was looking at because all that metal has gone. Time to start drilling! I was hoping not to have to do...

Excuse any rough work. 7 years ago and cutting my teeth on my first attempt of a resto!

May be @resto_d1 could help. He has a few threads/builds on a disco. Have a search. I know he’s done the rear of the body,not sure on alpine light area

Thats why we went out on classic car tours. Recovery company organised & re patriate your car if broke(happened twice to 1 car) If your motor is in good condition just pack a good tool kit to fix the basics.recovery company can do the rest.

Air tight back to UK recovery

It doesn't owe me much. Maybe time to find an enthusiast who wants a project!

Well, after a few Years in the wilderness I’ve returned to LandRover ownership - this time it’s a 2010 Discovery 4 HSE, like I don’t have enough grief in my life! It has some, errrm, issues to address - AC is fubar, brakes are interesting, the...

Cut it off and bash the new one in and weld it on, if you have the one with the reduced tube size. I would support the tub with a jack and piece of wood when removing the bolts. Don't weld galvanised metal as its bad for you.

Rolling road is good.Yep it costs a bit but you can tune while stationary. Keep up the good work & enjoy the go cart on the back roads

As reported elsewhere the mini has been all tuned up on a rolling road. :) Horrendously expensive (£562) but the results seem to be good. It really does go well now. What did he find wrong? 1. Incorrect coil (he reports that it had a "points"...

Oh oh, I decided to reseal the LT230, whipped off the sump to find this: I guess the bits I found in the R380 are just incidental... Will need to strip it down to see if any other bits in the box are nadgered...

Have you measure the gap(door opening) On both sides of the motor? Have you measured the doors? This will tell how much you need to make the drivers side larger

Honda 125 Twin 1977 This has been in a collection for decades and has never been on the road in that time. The speedo is showing less than 100 miles. It is in amazing condition and surely the best available. It's had an MOT although it's...

Had one before, they are quite good. Just not overly bothered about seeing out the back. Cant see much anyway

Yes I agree , I intend to use a 12v linear push pull solenoid , these can be of various power and speed rating , hence asking if anyone had used one , I will be producing a bracket for it and I'm sure it will take a couple of solenoids to get the...

Out in the edges of netheravon with flags flying.permissive acsess for work) Not in my normal 4x4 but hopefully won’t be getting stuck…

Apologies for the delay. Grommet hole is for the wiper spindle. The bolt is the rivnut to prevent the motor turning. If you require any more or specific measurements let me know as I have the blank door atm.

Believe it or not I have only a couple on the phone. You will have to wait for some others when I get them off the camera. Just the two of us today, a first timer came along in a 200tdi 90, said he enjoyed the day and would come along again...

The B pillar lower sections were not in great shape: The spot welds make a nice popping sound when the fail. It did feel brutal and running the slitting wheel that close to good bodywork did raise the stakes. The wooden wedge idea came from...

GKN used a solinoid switch to activate them. Have a search you may find out more

Has it an inline fuse next to the changer?