We had strong winds last night, plant pots & garden stuff all over the place, part of the neebs fence down too. Suns out looks to be much brighter next week. Im off to have a look at the security light. Then I will need to go shopping or I'll...

There were some very nice cars at the Canvey Island Classic Car meet today. Here's one.

Didn't need to use a Jcb a pedal car would have done the trick 😂

That's a darn good idea will try next year 😴

Morninorl. Happy Mothers days mums. Hoping the poorly tratter will start so I can drop her off at the garridge. 😬 Nice day here, have a lovely Sunday.

Me nuts eye put out for me squirrel yer daft sossij.

Just put some more nuts out. Hoping to see him this time.

Lifted some ov me manc cobbles yesdi. No sand between them. Long gone. Sand below but filled wiv fine grass roots. Am starting to fink again about lifting it all. Flatterning the sand out after raking the weed roots out. Then putting it back...

Morning All. :D Up early cos theres a local classic car show and I ant to take the Mini and have gander. :) See you all later, have a great day. :D

Swap ye a calibrated one for yer v8 :p

Our dogs get fed every day at 1700 hrs. They state "creating" at about 1600 which is slightly annoying. Imagine their surprise when today the got fed before even making a noise!!! 🤣🤣

Just had a quick look at some youtoobs about calibrating torque wrenches. The methods, hanging weights off and doing maths, is very obvious and not a problem. My problem is finding the mech to do any adjustment, especially as the high power one...

I'll put my clocks forward after I get up in the morning. Then I'll get an early nap in the afternoon.

Here's another trumpet.....Wanting some slates I advertised them at 50p each.... email from Russell ... Looking for 100 slates 16x10 with shouldered top corners and two drilled holes want to send image to ensure it’s what I need. Will accept...

Aw cmooooooon. You know that I use "flipper" as a euphemism!! 🤣 🤣 🤣

All I've done is oil it and hope for the best!!

Ignition woes. Stanley Sir! and retarded are in the conversation. I'm sure there is a link somewhere there......

Dont you start again about flippers. 🤣 🤣

Yup I give it back to snap on they do it for free. Diggi tools available from 30 sovs.

Never mind!!;) ;) ;)

Yer one of mine went too so thats not so good is it. 🤣🤣

I meant me ya coconut 🤣🤣 So go back n edit yer sad face....

Had this earlier...................:p

.

Late to the party as per..🤣🤣

Sounds like timing id retard it a couple of degrees & see if it runs better you may have to mess about with your AFR though. I recently had to mess about with a boat carb engine.(inboard) Loads of people been looking at it for 2 years. Starts...

Depends if you want a family 💑👫👬👭

Here is a very good explanation of how vacuum advance works, or doesn't. https://www.motortrend.com/how-to/1601-everything-you-wanted-to-know-about-vacuum-advance-and-ignition-timing/

Just a thought regarding vac advance Putting your foot down retards the ignition, lifting it off advances ignition to allow for leaner mixture.

Harry's norrappy