M

Mingus

Active Member

• Mar 25, 2020

• #1

SO finally getting my S3 Hicap 2.25 petrol going after 2 years. New fuel tank, fuel pump (mechanical) and fresh fuel before starting. Started after blowing through fuel line from Tank to pump and fuel filter before carb. Dows start on choke but now petrol all around the base of carb and looks like from the main carb gasket. Whats likely to be the cause, Stuck inlet needle, float chamber full of ****e? Ta

 

C

Colthebrummie

Well-Known Member

• Mar 25, 2020

• #2

I'd start with the float chamber, it's the easiest to fix if it is that.

Col

 

M

Mingus

Active Member

• Mar 25, 2020

• #3

Colthebrummie said:

I'd start with the float chamber, it's the easiest to fix if it is that.

Col

Click to expand...

yeah, really need to take it apart....bugger!!

 

wireman

Well-Known Member

• Mar 25, 2020

• #4

Some Zenith carbs had an issue with the carb body warping so even with a new gasket it would never seat correctly, usually noticed by rough running due to extra air ingress, this could be your problem but as Col says, try the float chamber first. If you do need to rub down the carb body there is an article on here somewhere.

 

wireman

Well-Known Member

• Mar 25, 2020

• #5

Lapping a Zenith:
https://www.landyzone.co.uk/land-rover/zenith-fix-with-pictures.131772/#post-1353228

 

M

Mingus

Active Member

• Mar 28, 2020

• #6

Goes to show, always check the small things. Turns out it was an oversize fuel pipe into the carb that wasnt nipped up. Easy fix....phew.

 

wireman

Well-Known Member

• Mar 28, 2020

• #7

Mingus said:

Goes to show, always check the small things. Turns out it was an oversize fuel pipe into the carb that wasnt nipped up. Easy fix....phew.

Click to expand...

Glad you got it sorted