Olly_Webb

Member

• Jul 3, 2017

• #1

Hi guys, in trying to figure out what year the bulkhead is on my series Landy. I've looked in all my books and on tinternet but I can't find reference to one that has a rain gulley all the way across it (where the bonnet meets the bulkhead when it's closed - please see pic attached). Any ideas? Cheers. Olly

 

Attachments

• 
  20170703_203625.jpg

  166.2 KB · Views: 198

LordOWar

Well-Known Member

• Jul 3, 2017

• #2

It just looks like a series 3 bulkhead, my original looked like that (1976) and the galvo one I bought looks the same.

 

Bobsticle

De Villes Advocaat

• Jul 3, 2017

• #3

Looks like my 3 bulkhead. But then again mine could be half Ferguson and more than likely is.

 

J

John S

Well-Known Member

• Jul 3, 2017

• #4

X1 it's a standard series 3 bulkhead. How does your crankshaft breather system work with a K&N filter?

 

J

John S

Well-Known Member

• Jul 3, 2017

• #5

You need to get a parts catalogue and a workshop manual.

 

blue beasty

Leaks an prone to bits dropping off

• Jul 3, 2017

• #6

John S said:

X1 it's a standard series 3 bulkhead. How does your crankshaft breather system work with a K&N filter?

Click to expand...

Prolly out the rocker cover breather cap thingy wotsit

 

Bobsticle

De Villes Advocaat

• Jul 3, 2017

• #7

blue beasty said:

Prolly out the rocker cover breather cap thingy wotsit

Click to expand...

Think I've got wun of thems.

 

Land Raver

Well-Known Member

• Jul 3, 2017

• #8

I think it was pre 1973 models which had like 'eye brow' drain channels instead of the one big long one.

 

Rubins4

Well-Known Member

• Jul 4, 2017

• #9

Looks like my late series 3 with the mono-brow

 

Stretch

Well-Known Member

• Jul 4, 2017

• #10

Mono brow? Not popular with the ladies apparently - keep shtum about that...

 

Olly_Webb

Member

• Jul 4, 2017

• #11

John S said:

You need to get a parts catalogue and a workshop manual.

Click to expand...

Not the most helpful advice, but thanks anyway.

Seeing as none of the books in the picture had a bulkhead like mine I thought it best to all the question and as per usual landyzone users came up trumps!

 

Attachments

• 
  20170704_211459.jpg

  179.9 KB · Views: 146

J

John S

Well-Known Member

• Jul 4, 2017

• #12

Sorry that didn't come across correctly. My reason for suggesting this is that the parts catalogue has a detailed diagram of the bonnet. It wasn't intended to be dismissive. You can't wholly always rely on the forum if you are maintaining a landy. My suggestion was based on having the basic information to help!

 

tomhop

Active Member

• Jul 5, 2017

• #13

is the dark green haynes manual in the back of that photo any good? i have the green bible and the blue service and repair haynes manual and sometimes still end up scratching my head in bewilderment!

 

FFG

Active Member

• Jul 5, 2017

• #14

My mid 1974 has the same long arrangement but couldn't tell you if it was like that from the factory?

 

Bobsticle

De Villes Advocaat

• Jul 5, 2017

• #15

I think the only way mine left the factory was via the skip.