S

sniper3

Member

• Oct 19, 2013

• #1

All gears were selecting but when driving once changed from 1st to second the m and s lights would flash and d flashing on the dash and selector lights.

I took a gamble on the xyz switch and bought a brand new one. Upon fitting the switch the bolts will not line up with the holes in order to display N on the dash (switch was fitted in the N position)

Help please thanks

 

D

darrenm

Active Member

• Oct 19, 2013

• #2

We're abouts are you

 

S

sniper3

Member

• Oct 19, 2013

• #3

Oldham

 

D

darrenm

Active Member

• Oct 19, 2013

• #4

when I did mine I managed to get someone to hold gear stick in park and push xyz switch into same position until park is desplayed on dash then bolted it up tight there is a little adjustment on cable if you get stuck pop over as I'm only 20 mins away in Chorley

 

D

darrenm

Active Member

• Oct 19, 2013

• #5

when I did mine I managed to get someone to hold gear stick in park and push xyz switch into same position until park is desplayed on dash then bolted it up tight there is a little adjustment on cable if you get stuck pop over as I'm only 20 mins away in Chorley[/QUOTE]

 

D

darrenm

Active Member

• Oct 22, 2013

• #6

Did you sort it

 

D

Dave1992

Member

• Mar 19, 2018

• #7

darrenm said:

when I did mine I managed to get someone to hold gear stick in park and push xyz switch into same position until park is desplayed on dash then bolted it up tight there is a little adjustment on cable if you get stuck pop over as I'm only 20 mins away in Chorley

Click to expand...

Hi pal im having same problem but mine wont go into reverse sometimes i have to mess with tbox to get it to select reverse