navigator16078
New Member
does anyone on ere with a V8 use it is it any good
We use Wynns stuff in the workshop - Oil flush for most engines at service as well as the fuel conditioners as per the Trading Standards guidelines.
Not sure it is worth using this if you use a quality semi or fully synthetic oil though.
I used ZX1 in my RRC and the engine idle revs went up from 600 to a 1000 within 10 mins of using it, so I had to readjust that. Also used it in the disco but didn't see an increase in revs as the engine ECU to care or that but the engine spins a lot smoother.
I use ZX1 in disco and every car and bike I have had for 18 years
had to turn down tick over on disco, up from 750 to 1200 after adding it
what model of Disco was it that this happened to?
i think what there talking is called bollox
Sure, but if it is a TD5 or any other where the engine is controlled by an ECU, I want to know how an oil additive can have ANY effect on tick-over.
I think not only is this snake-oil, but the guy involved is a snake-oil-seller.
ITS A 300 TDI !!!
No ECU and manual tickover
If you're refering to me being a snake oil seller, at what point did I tell any one to buy it or where from
ZX1 has been covered on this forum before with same responses, bit to wise to actually suggest that any one uses their hard earned to buy any, just giving my experience , if some one wants to try it fine, if not fine It does not have any concequences for me
A personal choice "to each his own"
just for info watch this
YouTube - Extralube ZX1 Micro Oil Metal Treatment and Friction Reducer [url]www.team-zx1.com[/url]http://www.landyzone.co.uk/lz/<object width=http://www.landyzone.co.uk/lz/<object width=
300 tdi
the one thats on me profile