EVENING ALL!

HAVE HAD ENDLESS PROBLEMS WITH STARTING MY SERIES 3, ALWAYS SEEMS TO BE POOR GETTING FUEL UP FROM TANK(?) OR SOMETHING?! SEE PREVIOUS THREADS, BUT..................

put everything back to how it was before you made things worse - disconnect incoming at lift pump from tank and run direct from a small can/bottle - as i suspect it's just crap blocking the pickup
 
Erm..you on the scotch? That confirms what i said...the stc1190 isn't the series part. And thats what he's taken off...so i think he has a 2.5 not a 2.25..

think you is on the dope - 563146 superceeds the 1190 which fits 2.25s and early 2.5s
 
Fook it..order a stc1190..then you've got all bases covered...send the one that doesn't work back..
 
I believe the 2.25 had a seperate tube to fill oil, beside the rocker cover, on the left as you look at engine. If you can find engine number that'd sort it too.
 
I'm sure its a 2.25, looks spot on for the manual picture, does anyone have an image of a 2.5 or a link to one?

Cheers
Nick
 
This is a 2.25-

2andaquarter.jpg


This is how i found it-looks a little different now!!
 
ok cheers all!

Going to stick new pump in, but...........fuel pipe set up looks slightly different with three pipes coming off in total(?). But old one just had the two

Whats the double one, help!

Cheers
 

Similar threads