clive thomson
New Member
Replacing the fuel pressure regulator was the most difficult thing I have ever done on any car.What a lightweight eh ?
matthew2riches
New Member
The worst job for me is filling the dam thing up 
Freediscoranger
Active Member
repairng the seat diafram. dont bother! just get a new one
I agree. Three bolts and two hoses and it's nearly an hours work. Utter pain personified.
johnny curt 1
Well-Known Member
refitting the block core plugs on a disco2 300tdi fookin ballache to firstly get to and then get right
Mark L
Well-Known Member
Changing the dipstick housing on an Disco auto gearbox. Horrible.
Are the 2 bolts that hold it in place even accessible without taking the gearbox off??
I lost patience in trying to find out and ended up breaking it off without even attempting to secure the new one in place, as it seems to stay put perfectly fine once screwed back into the gearbox sump.
Are the 2 bolts that hold it in place even accessible without taking the gearbox off??
I lost patience in trying to find out and ended up breaking it off without even attempting to secure the new one in place, as it seems to stay put perfectly fine once screwed back into the gearbox sump.
Mark L
Well-Known Member
I nearly torched mine twice today poxy stupid thing
:lol:
Been there, nearly done that.
Why you got a 300 in yer disco 2 Were they no all td5s
jamesmartin
Well-Known Member
you undo mounts and crossmember a lower box down a bit to gain access to the bolt on bellhousingChanging the dipstick housing on an Disco auto gearbox. Horrible.
Are the 2 bolts that hold it in place even accessible without taking the gearbox off??
I lost patience in trying to find out and ended up breaking it off without even attempting to secure the new one in place, as it seems to stay put perfectly fine once screwed back into the gearbox sump.
John-Ellis
New Member
I agree with that one, just to get access to the poxy thing me and my dad spent hours removing the plenum chamber and hoses and everything else, right pain in the arse job.
The other ball ache job was removing the viscous fan and water pump, the mechanics who worked on it before tightened the nut way too tight, took hours to get it off.
John
