You say it selects 3rd and reverse in Low but not Hi,

Does it drive in LOW range in 3rd and reverse?

Cheers
 
Yeah so it selects and drivable in every gear in low but in high its as if the gear knob doesnt push into the gate?
 
I'd say change the oil and filter before anything else if you know it's old... a good practice is to change the oil once, drive it for half an hour to make it change through all gears many times then change it again with the filter, then you'll have about 75% renewed oil in it, a simple oil change will be max 50% new oil

EDIT: disregard this post i've had a mental hiccup
 
Last edited:
read on another forum about the gear selector can drupe or something so gets in the way on gates?
not sure tho
 
I am confused, as to how the ALL the gears in the gear box can be selected in LOW range but not in HI Range.

Cheers
 
It lists the vehicles it includes on each.
So as you have a discovery1 I would think Disc 3 would be good.

Cheers
 
neilly said:
I am confused, as to how the ALL the gears in the gear box can be selected in LOW range but not in HI Range.

Cheers
Click to expand...
I'm a bit confused about that too. The gearbox and transfer box are to all intents and purposes two separate units. So I cant see how one can affect the other in this manner, unless there's something going on with a loose or worn component near the two selector levers in the transmission tunnel where the levers live.
 
You must log in or register to reply here.

Similar threads

manuidat50
Disco 2 autobox loss of reverse drive.
Replies
3
Views
801
discool
discool
J
Discovery Sport Gearbox and related troubles
Replies
2
Views
1K
MJI
MJI
S
2001 range rover p38 auto gear dox issues
Replies
2
Views
795
kermit_rr
kermit_rr
G
P38 4.0 v8 Automatic goes into low range all on its own
Replies
7
Views
573
RangeRoller dt
RangeRoller dt
Officerdibble
Diff lock / high low range
Replies
9
Views
789
D1Nut
D1Nut