Sofasurfer

Sofasurfer

Well-Known Member
Defender 1997 tdi 300

With the engine running I can't select a gear, can't select low or high range either. With engine off I can select all gears and high / low.

Been standing about a week, no problems like this before. Any ideas what to check?
 
Clutch plate stuck?
Does the clutch feel like it’s working when you push the pedal?

I take it all was fine when you last drove it?

If it feels ok, try starting in gear with clutch pushed. Careful not to drive into something though:D

J
 
Clutch feels normal, checked fluid, level OK, looks a bit dark coloured, had a new clutch about 15k miles, no problems with clutch in the last three years. I can drive it both forward and reverse but can't change gear when engine running.
 
Silly question, how do you know it works when the engine is off? Have you tried rolling it while in gear with the clutch pressed?
 
With the engine off I can select every gear easily, clutch works fine. Engage gear switch engine on, car moves but can't change gear, can't engage neutral either.
 
When the engine is running and it's in gear, pressing the clutch down does not disengage the gear. In summary, it's stuck out of gear or in gear when the engine is running. Looks like a clutch problem not a hydraulic one.
 
I found a YouTube video which suggests it might be the return valve in the clutch master cylinder but there's no description of the fault so it's hard to decide if this is the cause, anybody got advice ?
It had a heavy duty clutch fitted 20k miles ago and has had an easy life since then, no towing.
 
Fluid bypass or rod working through fork. I had exact symptoms getting rev with engine running but general consensus seems to think as brand new clutch , the clutch plate is slightly being turned by fly wheel with engine running stopping me selecting rev as no synchro. Engine off, no problems . As yours was ok for a while suggests hydraulic issue.
 
Just checked the flexi pipe and slave, no signs of a leak or damage to pipework from master. A new heavy duty fork was fitted with the new clutch. Clutch fluid reservoir is full, breather hole clear. Workshop manual suggests hydraulic problem but if that is the case why can I select gears when the engine is off?
 
Sofasurfer said:
Just checked the flexi pipe and slave, no signs of a leak or damage to pipework from master. A new heavy duty fork was fitted with the new clutch. Clutch fluid reservoir is full, breather hole clear. Workshop manual suggests hydraulic problem but if that is the case why can I select gears when the engine is off?
Click to expand...
Because everything is aligned cos it's not turning over....
 
If fluid was not returning to reservoir you would have no drive at any time.
Sofasurfer said:
I found a YouTube video which suggests it might be the return valve in the clutch master cylinder but there's no description of the fault so it's hard to decide if this is the cause, anybody got advice ?
It had a heavy duty clutch fitted 20k miles ago and has had an easy life since then, no towing.
Click to expand...
 
Have you tried starting it up in gear with the clutch depressed? (I see that you have)
Warm the engine up a bit first and when it at arts moving, stamp on the brake.
This should free it if the plate is stuck.
 
Last edited:
When I start it in gear it moves and I can't change gear or put it in neutral. It's on the drive, house in front, road behind. Got a recovery organised, chatted to guy who fitted the clutch, he thinks it's a hydraulic problem. I think the seals in the master cylinder are perished. We will see. Thanks everyone for the advice :)
 
Turns out the hydraulics were fine, the clutch (only 20k miles old) had deformed for no apparent reason. New heavy duty clutch fitted.
 
You must log in or register to reply here.

Similar threads

N
Clutch problem unable to change gear
Replies
9
Views
370
Anaconda
A
T
Gear selection problem
Replies
3
Views
881
miktdish
miktdish
P
P38
Replies
2
Views
746
brianp38dse
brianp38dse
B
Defender 90 won’t move forward in gear.
Replies
3
Views
1K
KISSMYAURA
KISSMYAURA
B
Disco2 TD5 Can only select one gear
Replies
8
Views
914
Bugz
B