cornish rattler · Mar 28, 2015

Jaspermowatt said:
The movement is coming from inside the transfer box so not sure how I'd tighten it without taking the box apart?

Thought he was talking about the output flange where the propshaft fits onto

Jaspermowatt · Mar 28, 2015

I took the front prop off and went for a spin and there was no spin. looking at one of the uj, it looks like its wrong, there is a small amount of play but I am going to replace both ujs anyway. Hopefully it'll sort the problem.
Thanks for the help

.

nobber · Mar 28, 2015

Jaspermowatt said:
I took the front prop off and went for a spin and there was no spin. looking at one of the uj, it looks like its wrong, there is a small amount of play but I am going to replace both ujs anyway. Hopefully it'll sort the problem.
Thanks for the help .

Is there still play in the flange?

Jaspermowatt · Mar 28, 2015

nobber said:
Is there still play in the flange?

Yup. Also ordered the transfer box out put bearing and affiliated parts so hopefully that'll sortout the play at the flange end

cornish rattler

Well-Known Member

Jaspermowatt

Active Member

nobber

Well-Known Member

Jaspermowatt

Active Member

Similar threads