seraphin

New Member
Can anyone enlighten me as to where the main mounting points are for a TD4 (facelift) radiator? I've looked on Rave, but the graphics are unclear to me. If I reach down behind the radiator (the side with the fans) and shake it, there is no movement at the bottom, but if I shake it near the top it has quite a bit of play (about 10mm back and forwards). It seems likes the mounting points near the top (on both sides) are loose.

I see the 2 little plastic hex bolt thingies (scrivets?) at the top, and I've tried turning them with an allen key, but nothing much happens. WTF???? When I wiggle the top of the radiator back and forward, I see the scrivets moving back and forward with the radiator.

Any advice much appreciated.............. Hope I don't need to need to remove the bumper!
 
This pic may help

No8007_PCC000321.jpg
PCC000321G.jpg


at the base are two pegs that drop into the chassis with bolts at the side and at the top are two bolts, i think :)
 
Last edited:
I can only find 2 plastic pegs (hex bolt) at the top. Surely there must be something more than a plastic peg at the top???
 
i wish. no idea how to view the 4 bolts in the centre of each side, from the engine side. am i being an idiot? are u sure i don't need to remove the bumper? or dismantle the fans etc?
 

Similar threads