aaronmorris
Head's a shed
Bloody hell. You've got a chassis in yer front room 
Last edited:
Haha think I'll be sleeping on that for a while!!Bloody hell. You've got a chassis in yer front room
aaronmorris
Head's a shed
Wish I had a work space that big Where's your chassis from? And how much? (if you don't mind me asking
) Will be getting one myself shortly
Richards chassis and I paid £1500 delivered.... I ordered before they put the price up! It's all the other stuff that makes the price go up!
Where's your chassis from? And how much? (if you don't mind me asking
Will be getting one myself shortly
aaronmorris
Head's a shed
Cool. Richards is who I was going to go with as they're only down the road
£1434 for a standard chassis if I collect. You get some money knocked of the list price? As mines over £1500 with delivery
Last edited:
Ok guys I'm 3 days away from deadline.... I think I'm going to make it I have engine and box in and bulkhead on but I need help, the chassis has no holes for brake line clips so I'm going to have to drill holes for the new clips.... The old lines were replacements and didn't take a particularly nice line down the chassis to the back axle.... So can I have a picture of your brake lines going from the bulkhead to the rear flexi, thanks
don't have a 90, but if they are like the 110 it runs down the top of the offside rail next to the fuel lines. iirc it uses the same clips.
if i were you, i would not be drilling holes in the chassis. i wouldn't want to harm the galv.
for now just use large zip ties to keep them in place on the chassis rails, then come up with a better idea later on. like use rtv/silka to glue some clips on.
if you are going to drill, then spray it with a zinc rich paint like galvafroid.
if i were you, i would not be drilling holes in the chassis. i wouldn't want to harm the galv.
for now just use large zip ties to keep them in place on the chassis rails, then come up with a better idea later on. like use rtv/silka to glue some clips on.
if you are going to drill, then spray it with a zinc rich paint like galvafroid.
Last edited:
shouldn't fail on zip ties, i've had pipes zipped for years and years with no issues.
you could put some hose over them to stop chafing. the proper connectors would be best though.. but you only have 3 days left
yeah, seems odd. give them a ring and ask.
good luck, i'm finishing off a engine conversion on a 110 tomorrow, so pm if you need any pics while i'm under it
