owen88

Member
Hi guys

I need to pick your brains !!!!
I have a 1995 range rover p38 4.0 se. Since buying the p38 I noticed after 3 months of owning the vehicle that I was loosing coolant and had no heat coming through the vents, also the hevac had the notebook symbol and explanation mark aswel.
so I decided to take the dashboard out to access the matrix heater. I have taken the matrix out and noticed that it was knackered. I've now replaced this and it now 80% done on putting everything back together however I've come across a yellow/ green and black wire that goes into a two pin white plug but I cannot find where it plugs into.??:mad: the wire is located under the steering Column the wire comes off the main wiring loom. I would appreciate it if someone could give me some advice please :)

 
Hi guys

I need to pick your brains !!!!
I have a 1995 range rover p38 4.0 se. Since buying the p38 I noticed after 3 months of owning the vehicle that I was loosing coolant and had no heat coming through the vents, also the hevac had the notebook symbol and explanation mark aswel.
so I decided to take the dashboard out to access the matrix heater. I have taken the matrix out and noticed that it was knackered. I've now replaced this and it now 80% done on putting everything back together however I've come across a yellow/ green and black wire that goes into a two pin white plug but I cannot find where it plugs into.??:mad: the wire is located under the steering Column the wire comes off the main wiring loom. I would appreciate it if someone could give me some advice please :)


It is the clutch position switch cable used on the manual models.
 
Few thankyou wammers :cool2:was worried i would be having to rave the dashboard out again :( hopefully as from friday she back on the road whoop whoop
 

Similar threads