Troy81

Active Member

• Jul 27, 2012

• #1

all set up to install.. is there any tips or tricks to pass the speaker wires throught the rubber to the rear door

 

S

Sean

Banned

• Jul 27, 2012

• #2

use one of the existing wires as a pull through

 

Troy81

Active Member

• Jul 27, 2012

• #3

cheers what i have at the moment is the existing wires are to lenth with not much play and all taped up its all as i bought it.. if thats the way forward as i thuoght then ill plan it with a bit more time. just thought there was any other ideas peeps might have used cheers Sean.

 

S

Sean

Banned

• Jul 27, 2012

• #4

wire coat hanger, with the end bent over and taped so it doesn't get stuck

cheap sparky flexi rods

length of 4mm single

 

discool

Well-Known Member

• Jul 27, 2012

• #5

A long cable tie is what I used.

 

Troy81

Active Member

• Jul 27, 2012

• #6

Thank you cheers guys