Apart from moving the seat and probably heating what is the amount of wiring under drivers seat of classic rangie doing?

I have lost use of seat switch, though the switch itself is working and wonder if I can power motors via 4 new switches by uncoupling connector to the motors and replacing with 1 powered by the new switch.

Alternatively could not being able to move drivers seat, passenger`s one fine be due to faulty ecu and where is it and what does it look like?

charles b said:

the switch itself is working and wonder if I can power motors via 4 new switches

Click to expand...

I is confused - if the switch is working - why replace it. Check that there are volts before and after the switch then check volts at the motor.

the seat switch will work if connected to passenger seat all be it by only one connector. But does not move the drivers seat when reattached, I have been able to get 4.85volts reading from the connectors when tested with switch removed, is this right?

the motors work if connected to the battery directly, relays ok and I have power.

Anything else apart from ecu?

thanks .

compare the volts on the good working side to the suspect side in as many points as you can get access to.