haza88

Well-Known Member
hi guys

fitting a 200tdi into my c reg defender and wondering if some one can help me with identifying the red and white wire and the large connector below it, need a wiring diagram if poss or info on what wires go where

cheers for any help

IMG_1545.jpg
 
There's a white and red wire going from starter relay to glow plug timer and ignition switch if that helps as I'm flicking through manual on both pre / post 93 models
 
cheers for your help guys and ricksdef yea that would be great a pic would be eally appeciatted too
 
Had a look in relevant place, but there are no red/white single wires there! Had a good old root around but still nothing ! Must be a different loom i'm guessing..Sorry i cant be of any help .
Rick...
 
What was in there before? You have a ballast (200s use a timer) so i'm guessing a 2.5td? Might be time for dash of and start tugging that wire approach. Could even be a custom random.
 
i brought the defender with a diahatsu fourtrack engine in lol

i have a single white and red wire which splits into two red n white wires coming from the 200tdi starter motor...
 
reet - single W/R from starter solenoid, goes to Heat/Start switch, and from there goes to brake check relay.
 

Similar threads