I've just had a small fire in the engine bay of my '97 Range Rover 4.6 HSE, caused by a short. The wiring loom which connects to the back of the ABS booster and goes through the fire wall into the cab needs to be replaced/repaired. I can't find the correct harness reference in the spares manual, not sure if it's the engine bay or facia harness. Does anyone have any idea which harness I should be looking for? I'm hoping to get a used harness then splice in the necessary length with the connector, thus avoiding any colour code connection issues.

Thanks

Hugh

Call Emmotts (forum sponsors and champion RR breakers) - see the link at the top of the page.

A