rps88

Member
Hi guys im assuming these are some sort of common connector blocks of some kind but can anyone confirm what these exactly are?

IMG_20231107_193147079.jpg
 
That confirms my suspicions, everything weve found so far with the wiring is very bizzare. There was a bank of 3 relays and 2 fuses under the bonnet and i couldnt find a thing on any forums or manuals ect so when we traced it all back the relays were linked into eachother then ran through the cab and terminated behind the pass footwell on a connection but not actually into anything, im not quite sure why anything would need 3 relays in series then 2 fuses but i can only think it was for something that a previous owner removed. The joys of a 30 year old car i suppose
 
I havent got a clue bud the only thing i noticed externally is on the d pillars at the side of the tailgate are 2 small holes either side asif it had something mounted on the rear but that could of been some kind of rear lights for offroading other than that were was a toggle switch under the drivers seats that was also wired into the front the terminated to nothing but weve removed about 10 or 15 connectors from here and there that arnet doing anything as im trying to simplify the wiring as much as possible before we start to rebuild it for good
 
Sumitomo Header used on most land rover models blue 6,4 ,6, 4 20 way male (64000014 ) and female (64090073),they separate to isolate the spliced cable affectively a means of joining harness cables in a 6,4,6,4 configuration. The grey is 8,4,8
 
Last edited:

Similar threads