Dangermike · Apr 21, 2015

Hi,

Would like some opinions on wiring a 6 way aux fuse box

I was hoping to make them all ignition only?
Not sure if I can use one relay for them all.

For now I only have 2 cigerette lighters to wire in to it.

So would like to know,

Can I use 1 relay and make the whole fuse box ignition,
What size fuse would you use for cigerette lighter?
And what size cable

Kind regards

gstuart · Apr 21, 2015

Dangermike said:
Hi,

Would like some opinions on wiring a 6 way aux fuse box

I was hoping to make them all ignition only?
Not sure if I can use one relay for them all.

For now I only have 2 cigerette lighters to wire in to it.

So would like to know,

Can I use 1 relay and make the whole fuse box ignition,
What size fuse would you use for cigerette lighter?
And what size cable

Kind regards

hi mate

can't answer all ur questions but

know u can get fuse boxes , that u can wire half permanent live and the other half switched live

so if u had a 6 x way fuse box, could have 3 x perm live and the other 3 x swl

I think the cig lighter is 15 amp, if u have a quick look at ur drivers side fuse box should tell u, sorry can't remember off the top of my head

wire sizing depends in what u intend to run off the fuse box

there's some good articles on here via the search button with regards to the formula used in order to work out the amperage of the item and then what size wire and amps

if u can't find it , let me know and will find it for u

do u know what u are likely to use the aux fuse box for plse

sorry can't be more help to u mate

Pikey · Apr 21, 2015

Easiest way to wire the fuse box is to "daisychain one side of the fuse box connections. so wire soldered to 1st pin then onto 2 nd then 3rd and so on. Use 60amp cable, that should cover the loading. 100AMP relay and 50AMP fuse

If you want a split load 2 feed wires 3 pins soldered to each wire.

gstuart · Apr 21, 2015

Pikey said:
Easiest way to wire the fuse box is to "daisychain one side of the fuse box connections. so wire soldered to 1st pin then onto 2 nd then 3rd and so on. Use 60amp cable, that should cover the loading. 100AMP relay and 50AMP fuse

If you want a split load 2 feed wires 3 pins soldered to each wire.

see some of the fuse boxes where u can buy a small metal connector that fits onto one side to do the same job as u say of daisy chaining

Dangermike · Apr 21, 2015

Hi guys thanks, so if I have .... 60 amp cable from battery to 50 amp fuse to 100 amp relay, then daisy chained fuse holders...

Then for the 12v socket in boot was gonna be used for cool box (3.5a)
And
On dash was gonna fit one of those usb sockets 2.1a max....

For those 2 would 10amp cable be ok? With 5 amp fuses?

teddywood1 · Apr 21, 2015

when ever I do electrics on a car I always be over careful I would use say 15 or even 20 amp wire because one day you might be tempted to use something else as well.

Pikey · Apr 21, 2015

Dangermike said:
Hi guys thanks, so if I have .... 60 amp cable from battery to 50 amp fuse to 100 amp relay, then daisy chained fuse holders...

Then for the 12v socket in boot was gonna be used for cool box (3.5a)
And
On dash was gonna fit one of those usb sockets 2.1a max....

For those 2 would 10amp cable be ok? With 5 amp fuses?

For the fag lighter Always use 15A wire. Get the thinwall gear. for the USB charger 5amp wire will be fine..

Pikey · Apr 21, 2015

Oh and make sure the fuses match the appliance If you put a 5amp fuse on a 3amp appliance you can fry the appliance before the fuse trips.

Dangermike · Apr 22, 2015

thanks for your replys... thinking i should have checked this all before ordering things...
the fuse box i have is this. UNIVERSAL CAR 6 WAY CIRCUIT ATO STANDARD BLADE FUSE BUILD IN BOX HOLDER 12V-24V | eBay

whats the easiest way to daisy chain this with a 60amp cable?? seems bit thick for spade connectors.

if not I'm thinking to have the fuse box permanent live with individual relays for different accessories but that just seems messy

gstuart · Apr 22, 2015

Dangermike said:
thanks for your replys... thinking i should have checked this all before ordering things...
the fuse box i have is this. UNIVERSAL CAR 6 WAY CIRCUIT ATO STANDARD BLADE FUSE BUILD IN BOX HOLDER 12V-24V | eBay

whats the easiest way to daisy chain this with a 60amp cable?? seems bit thick for spade connectors.

if not I'm thinking to have the fuse box permanent live with individual relays for different accessories but that just seems messy

have u seen this company

they do a catalogue also

this is one of the fuse boxes I've got

Distribution and 6 Way Fuse Box - Car Builder Solutions - Kit Car Parts and Accessories

can split it between perm live or swl if u wish

company does all that u need

here's one of there other fuse boxes

http://www.carbuildersolutions.com/uk/led-indicating-6-way-blade-fuse-box

hope it helps abit

Dangermike

Active Member

gstuart

D3 Grandad

Pikey

Dummy Ejection Facilitator..

gstuart

D3 Grandad

Dangermike

Active Member

teddywood1

Well-Known Member

Pikey

Dummy Ejection Facilitator..

Pikey

Dummy Ejection Facilitator..

Dangermike

Active Member

gstuart

D3 Grandad

Similar threads