timtheenchanteruk

Well-Known Member

• Sep 9, 2012

• #1

picked up a voltmeter for a couple of quid, letting me move the clock to the middle to apease the wife.
Seeing as there's folk on here that know fender looms well, just wondered which wire in the dash to tap for the live feed for the voltmeter?

Its a 110 SW 300tdi if it makes a difference.

 

tacr2man

Well-Known Member

• Sep 9, 2012

• #2

One that is ign live only (or will flatten battery) , so green should be OK

 

TheKeymeister

Active Member

• Sep 9, 2012

• #3

tacr2man said:

One that is ign live only (or will flatten battery) , so green should be OK

Click to expand...

That won't work too well for a clock....

 

timtheenchanteruk

Well-Known Member

• Sep 9, 2012

• #4

clock is fine, theres a feed for that in the centre already, twas the voltmeter i was looking for a feed for, cheers.

 

TheKeymeister

Active Member

• Sep 9, 2012

• #5

timtheenchanteruk said:

clock is fine, theres a feed for that in the centre already, twas the voltmeter i was looking for a feed for, cheers.

Click to expand...

I read it as you'd bought a voltmeter (as in multimeter) that meant you had the tools needed to move the clock....lol!

 

MPfive

Active Member

• Sep 9, 2012

• #6

It might be white if your tapping into it near the ignition barrel.

 

timtheenchanteruk

Well-Known Member

• Sep 9, 2012

• #7

Ive got a multimeter or two, being a sparky!!!

was just seeing if there was a pointer of which wire to look for, usually better than randomly looking for them!!