Hicap phill · Thursday at 16:01

That looks like a starter relay.
Green I think are the heater control.

Make sure then purple wires are covered as they are live

s8ndst0rm · Thursday at 16:24

Hicap phill said:
That looks like a starter relay.
Green I think are the heater control.

Make sure then purple wires are covered as they are live

Purple ones on Picture 001A @Hicap phill ?

With the rats nest, if I only care about the wiper motor and the horn, will either of them likely need grounding or routing into a fuse? It'd be great to get rid of the many redundant connections.

s8ndst0rm · Thursday at 16:25

Should've also asked, do these just pull off the back of the fuse box plate or are they connected in some fancy way?

Hicap phill · Thursday at 16:39

s8ndst0rm said:
Should've also asked, do these just pull off the back of the fuse box plate or are they connected in some fancy way?

Well that grey looking 1 is the started relay. The 1 with the white/red cable to it
Unsure what that ray in the dash is now
The relays just slide off.

Have you found an indicator relay?

Look on the stalk for the colours you are looking for. Think there are 2 plugs

s8ndst0rm · Thursday at 16:51

Found an indicator relay flopping around yes and that’s all working as required.

What else will the relays be on the back of the fuse box if not the starter and indicators which I’ve already identified?

Hicap phill · Thursday at 17:11

s8ndst0rm said:
Found an indicator relay flopping around yes and that’s all working as required.

What else will the relays be on the back of the fuse box if not the starter and indicators which I’ve already identified?

On the early glass fused motors you can’t have the fog lights & high beam on at the same time. This may be 1 of the other relays.

s8ndst0rm · Thursday at 17:44

Hicap phill said:
On the early glass fused motors you can’t have the fog lights & high beam on at the same time. This may be 1 of the other relays.

I’m running LED headlights and sidelights. Wonder if this makes it redundant.

Hicap phill · Thursday at 18:28

s8ndst0rm said:
I’m running LED headlights and sidelights. Wonder if this makes it redundant.

Have you just replaced the headlights for LEDs?
It’s built into the wiring loom for the fog light relay. Easiest way turn on your high beam & fog light & see if they work.

s8ndst0rm · Thursday at 19:34

Hicap phill said:
Have you just replaced the headlights for LEDs?
It’s built into the wiring loom for the fog light relay. Easiest way turn on your high beam & fog light & see if they work.

No, I bought it with them switched out

Hicap phill

Well-Known Member

s8ndst0rm

Member

s8ndst0rm

Member

Attachments

Hicap phill

Well-Known Member

s8ndst0rm

Member

Hicap phill

Well-Known Member

s8ndst0rm

Member

Hicap phill

Well-Known Member

s8ndst0rm

Member

Similar threads